|Exam Name||:||SNIA Storage Networking Management & Administration|
|Questions and Answers||:||120 Q & A|
|Updated On||:||February 21, 2018|
|PDF Download Mirror||:||Pass4sure S10-201 Dump|
|Get Full Version||:||Pass4sure S10-201 Full Version|
Which conflict would cause fabric segmentation?
zone content mismatch
only one zone set activated
E_Ports not included in zone set
inconsistent ISL zone configuration
Which typical data characteristics would define archival data? (Choose two.)
Your customer has upgraded to faster tape technology and the backup is now taking
longer. No other changes have been made. What is a possible cause of the performance degradation?
tape buffer overload
backup server cannot sustain required throughput
serpentine recording changed to helical scan technology
highest Domain ID
highest world wide name
lowest Domain ID
You have recently upgraded a tape drive on a older switch to operate at 120MB/s from 80MB/s. Prior to purchasing the tape drives, you tested server dumps to a disk array across multiple ports and saw speeds exceeding 150MB/s. With the new tape drive, you have not seen any dump speed exceed 100MB/s. What is the most likely cause?
The new tape drive has logged into the fabric as a storage initiator.
The switch only has 1Gb/s ports.
You have not yet reset the switch port buffer credits.
The tape drive has logged in as an iSCSI device.
A HBA has failed in an application server that connects to a Fabric that uses WWPN zoning. Which two (2) steps should be completed after replacing the HBA to bring the application server back online? (Choose two.)
Change the zone configuration.
Change the application metadata server. C. Change the WWPN login of the HBA.
D. Change the LUN masking configuration.
A customer has a SAS-based storage environment with a SAS domain and some standalone servers, each with multiple built-in SAS disks. The implementation includes
direct routing, table routing and subtractive routing. Which role does a fanout expander play in subtractive routing?
It routes between edge expanders connected to it.
It forwards routing requests to all other connected edge expanders.
It disables currently unused branches to increase throughput.
It is the sole source of subtractive routing requests in the SAS domain.
Which set of SCSI components are required to support SCSI command tag queueing?
adapter, adapter driver, device, device driver
adapter, device, device driver
adapter, device driver, controller, controller firmware
device, device driver
You are the system administrator of a medium-sized manufacturing company. The chief executive officer (CEO) is concerned about business continuity in case of a disaster. He constituted a project team to develop a business continuity and disaster recovery solution. The team is discussing replication strategies. What two (2) dependencies need to be considered in time-to-create and incremental re-establishment of a split mirror? (Choose two.)
What should the administrator verify before connecting a stand-alone populated switch to an existing fabric?
Verify port type assignment
Verify domain ID assignment
Verify FC_ID port assignment
Verify principle switch assignment
A four-way cluster is attached to two fabrics. Each member has two HBAs connected to each fabric. Each fabric has two subsystem connections. Each cluster member is a primary for one application. All LUNs appear on all storage ports with workload equally distributed across all. Each host has two dedicated HBAs for tape that can each see four independent LTO II (35MB/s) tape drives. All files are large and involve sequential I/O. Performance reporting shows a large read pending at the host during multi-threaded backup. What is the most probably cause for the large read pending at the host?
native command queueing
SCSI Queue Depth too high
SCSI Queue Depth too low
throttling threshold is too high
Last month, you successfully merged two (2) local SAN islands into a single core/edge
fabric topology and connected storage devices to the core switches. Performance benchmarks were met or exceeded. In recent days, server administrators have documented a slow down in performance as I/O demands have increased. Storage administrators report that all storage ports are under-utilized. What is the most likely explanation?
conflicts between SAN routing protocols
storage port buffer credit limits have restricted I/O capabilities
multiple process login failures
over utilitization of one or more ISLs
The customer has an existing fabric switches installed from one manufacturer. They have decided to add a redundant fabric using switches from a different manufacturer. Interoperability is their main concern. What is important when considering interoperability in the SAN?
switch interoperability mode
HBA firmware/driver code
zone naming convention
What is the next step after making a backup of your fabric configuration before making changes to the active zone set?
Create a new zones
Activate change tracking
Disable the active zone set
Copy the active zone set
Get Unlimited Access to all ExamCollection's PREMIUM files!
Enter Your Email Address to Receive Your 30% Off Discount Code
Please enter a correct email to Get your Discount Code
Download Free Demo of VCEExam Simulator
Experience Avanset VCE Exam Simulator for yourself.
Simply submit your e-mail address below to get started with our interactive software demo of your free trial.
The membership-driven SNIA organization offers some of the industry's most highly recognized storage certifications. Find out how these certs can advance your career in networking storage administration and design.
The Storage Networking Industry Association (SNIA) is a non-profit consortium of storage vendors with a mission to educate and certify IT professionals interested in pursuing a career in the storage arts and sciences. SNIA is the preeminent provider of vendor-neutral storage education and certification.
The SNIA certification ladder offers challenging and informative education and certifications for all levels of storage knowledge and experience. You can leverage SNIA certifications to help you achieve your career goals in the storage space or you can simply use the certification training and exam process to learn more about this critical area of IT.
SNIA Certification Program Overview
The SNIA Storage Networking Certification Program (SNCP) offers vendor-agnostic credentials in storage and data management that provide an excellent base upon which you can build your knowledge and expertise. SNCP credentials fall into three primary domains, each featuring various SNIA certifications at the Professional, Engineer, Architect and Expert levels:
SNIA also offers the SNIA Qualified Storage Sales Professional (SQSSP), geared toward sales and marketing professionals who need to understand storage concepts and perform customer need assessments for complex data centers. With this information in mind, let's take a look at the storage certifications offered by SNIA and where each might fit into a training and certification portfolio.
MORE: IT Career Paths & Certification GuidesMORE: Best IT CertificationsMORE: Best IT TrainingMORE: All IT Careers Content
SCSP: SNIA Certified Storage Professional
The SNIA Certified Storage Professional (SCSP) was introduced in early 2016 to replace the CompTIA Storage+ Powered by SNIA certification. The vendor-neutral, professional-level SCSP validates a candidate's knowledge of storage protocols, disaster recovery techniques and basic storage networking concepts. The credential is geared toward IT pros working in various storage-related roles, such as:
To obtain the SCSP cert, candidates must pass the Storage Networking Foundations Exam (S10-110). The exam costs $200 USD and is available through Prometric testing centers.
A variety of training options are available including SNIA practice exams, an e-course ($195 USD), online instructor-led training (about $1,500 USD; prices are listed in euros so the final price may vary somewhat) and classroom-based instructor-led training ($2,790 USD). From time to time, SNIA offers discounts on training to SNIA members and may offer exam and other discounts to those who attend training.
CompTIA Storage+ Powered By SNIA
After a successful partnership that spanned five years, CompTIA and SNIA decided to discontinue the Storage+ credential. Professionals who already hold the cert need not worry as it remains valid for three years from the exam pass date. However, the Storage+ cert expires on December 31, 2018, so certification holders are encouraged to refresh the credential with the SNIA Foundations exam instead.
SCSE: SNIA Certified Storage Engineer
The SNIA Certified Storage Engineer (SCSE) certification is the next logical rung on the SNIA storage ladder. This certification gets into the technical meat of storage principles, and students will analyze more real-world storage scenarios while preparing for the SCSE exam than in SCSP certification training.
SCSE topics include monitoring and configuring storage networks, best practices, standards, and backup and restore activities. The certification covers the core responsibilities and essential knowledge required to be a hands-on storage engineer or a sales engineer who specializes in storage solutions.
Successfully passing the Foundations exam is a prerequisite for attaining the SCSE certification. You must also pass the new SNIA Storage Networking Management & Administration exam (S10-210) to complete the SCSE. (SCSE credentials earned on the older Storage Networking Management & Administration exam ">S10-201 remain valid for three years from the exam pass date. Any credential earned on this exam expires on August 31, 2017.)
SNIA maintains a list of reference materials to prep for the exam, along with e-course information and more on the certification web page.
Note: Candidates may still find references to the CompTIA Storage+ Powered by SNIA cert as a prerequisite for the SCSE credential. The Storage+ credential has been withdrawn by SNIA in early 2016 and is no longer available from CompTIA. Until it expires in 2018, it remains valid to meet pre-requisites, though.
SCSA: SNIA Certified Storage Architect
Once you have your SCSE certification and some real-world experience in installing and administering SANs, the SNIA Certified Storage Architect (SCSA) certification allows you to take your storage knowledge and expertise to a whole new level. SCSAs assess project or infrastructure storage requirements from both a technical and a business perspective. Once the business and technical drivers are identified and documented, a storage architect then plans and designs storage implementations to meet those requirements.
This certification dives more deeply into storage networking theory and best practices than similar certifications, including ITIL (Information Technology Infrastructure Library) and ITSM (IT Service Management) principles relating to storage design and implementation.
Candidates must pass both the Foundations exam and the current Storage Networking Assessment Planning and Design exam (S10-310) to earn the SCSA credential.
SCSN-E: SNIA Certified Storage Networking Expert
Achieving your SNIA Certified Storage Networking Expert (SCSN-E) certification gives you elite status in the storage arena. The SCSN-E designation is the crème de la crème of the SNIA certification ladder, which means it's a challenging certification to complete.
This level of the SCSN-E certification isn't so much an additional certification as it is recognition by SNIA that certain SCSN-Es have mastered all the knowledge areas for the other SNIA certifications, and that they've put that knowledge to practical use solving real-world storage problems. They also have demonstrated strong ability to design and implement storage solutions using storage devices and software from multiple storage vendors.
Prerequisites for the SCSN-E include the three exams for the SCSP, SCSE and SCSA certifications. Instead of being required to pass a dedicated test, SCSN-E candidates must complete a minimum of two SNIA partner storage certifications to be chosen at the discretion of the SCSN-E candidate. Those partner storage certifications include offerings from Brocade, Cisco, Dell, EMC, Hitachi, HP and NetApp.
Note: These are the only vendor-specific requirements in the SNIA certification program. You can review all applicable partner certifications and their details on the SCSN-E certification page.
Only 345 professionals have achieved the SCSN-E worldwide (as of this writing), so this is an exclusive club and a goal to which you should aspire if storage is your chosen career field. SNIA maintains the entire current list of SCSN-E Expert Level Achievers Worldwide on the certification page.
SQSSP: SNIA Qualified Storage Sales Professional
Sales people need love too and the SNIA Qualified Storage Sales Professional (SQSSP) certification shows them the storage love!
The SQSSP credential is an excellent way for storage sales people to become familiar with common terms and basic components for storage technology. This certification can also be beneficial to sales engineers who are new to storage and want to learn the sales side of the business along with the technical side of storage they can learn from technical certification. SQSSP topics include storage concepts, virtualization, storage networking technologies, and backup and recovery methods.
Once you pass the SQSSP test, you are then authorized by SNIA to add the SQSSP logo to your business card and email signature. There is an eLearning online course available for this certification as well as self-study materials that can help you pass the test. The exam costs $100 USD and is available from Prometric.
MORE: IT Career Paths & Certification GuidesMORE: Best IT CertificationsMORE: Best IT TrainingMORE: All IT Careers Content
The Storage Networking Industry Association (SNIA) is a non-profit, membership-driven organization dedicated to providing standards and educationcertification on IT storage technologies. It's been around since 1997 and is both well connected in the industry and highly respected therein.
The SNIA certification program offers the SNIA Certified Storage Engineer (SCSE), SNIA Certified Storage Architect (SCSA) and SNIA Certified Storage Networking Expert (SCSN-E) credentials. The SCSN-E is the pinnacle cert in this line-up, and identifies IT professionals who can design, deploy and manage a storage network in a multivendor environment.
This is a rigorous certification that can take years of experience and study to achieve. Those who persevere and earn the SCSN-E join an elite group of storage networking professionals at the top of their games.
Requirements: Pass three exams: SNIA Storage Network Foundations exam (S10-101) or substitute CompTIA Storage+ Powered by SNIA certification, SNIA Storage Networking ManagementAdministration exam ">S10-201 or S10-210, and SNIA Architect - Assessment, Planning & Design exam S10-300 or S10-310. Must also complete two SNIA Certification Partner product credentials. Partners include Brocade, Cisco, Dell, EMC, HP ASE, Hitachi Data Systems and NetApp. (See list at
Exam costs: $200 per SNIA exam + the cost of partner product credentials (which vary): $600 plus.
Article by ArticleForge
Accelerate insight. Improve skills. Get certified now.
IBM Certified Advanced Deployment Professional - IBM Service Management Security Intrusion Protection V1 Job Role Description Target Audience
An IBM Certified Advanced Deployment Professional - IBM Service Management Security Intrusion Protection V1 is an individual who has demonstrated a higher level of implementation knowledge and skill both in breadth and in depth in the IBM Tivoli Security Intrusion Protection solutions area
Recommended Prerequisite Skills
Recommended skills for this certification are outlined in each of the exam requirements below.
This certification requires 3 test(s).
Click on the link(s) below to see test details, test objectives, suggested training and sample tests.
Test C2150-533 - IBM Security SiteProtector Systems V2.0 SP8.1
Test C2150-561 - IBM Security Network Intrusion Prevention System V4.3 Implementation
Any 1 of the following tests:
Test CISSP - Certified Information Systems Security Professional
Test ">S10-201 - SNIA Storage Networking Management & Adminstration exam (">S10-201)
Test SSCP - Systems Security Certified Practitioner
*Note: Please forward a scanned copy of your non-IBM certificate to certifyus.ibmm. If you are also reporting your non-IBM certificate to PartnerWorld, please copy bpcertus.ibmm on the same email. PartnerWorld provides credit to your company for your non-IBM certification. This is separate from the purpose of sending the certificate to IBM's Professional Certification program, where the non-IBM certificates may complete an IBM Certification for you as an individual.
Note: Additional 'optional' exams may be added throughout the year.
Promotions Connect with Us Scroll Certifications for All Products, Updates, and Revisions
View all tests by number with test facts(# questions, passing score), links to preparation material, and all related latest news ... Learn more
View all tests by number with test facts(# questions, passing score), links to preparation material, description of the test material, new test addition and removal news ... Learn more
Our Member Site
Join us to access your certification history, certifications and much more ... Learn more