Download and Try out these real 310-202 question bank.

310-202 free pdf download | 310-202 real questions | 310-202 exam questions | 310-202 test prep | 310-202 VCE - partillerocken.com



310-202 - Certified System Administrator for the Solaris 10 OS, Part ll - Dump Information

Vendor : SUN
Exam Code : 310-202
Exam Name : Certified System Administrator for the Solaris 10 OS, Part ll
Questions and Answers : 558 Q & A
Updated On : April 22, 2019
PDF Download Mirror : Pass4sure 310-202 Dump
Get Full Version : Pass4sure 310-202 Full Version


How a great deal does it price 310-202 qustions bank with real dumps

I was so much lazy and didnt want to work hard and always searched short cuts and convenient methods. when i was doing an IT course 310-202 and it was very tough for me and didnt able to find any guide line then i heard about the site which were very popular in the market. I got it and my problems removed in few days when i started it. The sample and practice questions helped me a lot in my prep of 310-202 exams and i successfully secured good marks as well. That was just because of the partillerocken.

how many days education required to bypass 310-202 examination?

I bought 310-202 education percent and passed the exam. No troubles the least bit, everything is exactly as they promise. Smooth exam experience, no troubles to file. Thank you.

Observed these maximum 310-202 Questions in real test that I passed.

i would clearly recommend partillerocken to each person whos giving 310-202 exam as this now not just helps to brush up the concepts inside the workbook but additionally gives a fantastic concept about the sample of questions. first rate help ..for the 310-202 exam. thank you a lot partillerocken crew !

where will I locate questions and answers to look at 310-202 exam?

partillerocken helped me to score ninety six percent in 310-202 certification therefore i have whole faith on the goods of partillerocken. My first creation with this website was 365 days ago thru one in all my pal. I had made a laugh of him for the use of 310-202 exam engine however he guess with me approximately his maximum grades. It changed into true due to the fact he had scored ninety one percent I simplest scored 40 percentage. I am glad that my pal won the wager due to the fact now i have entire trust in this website and might come again for repeated instances.

Where can I find free 310-202 exam questions?

When my 310-202 exam was right ahead of me, I had no time left and I was freaking out. I was cursing myself for wasting so much time earlier on useless material but I had to do something and therefore I could only think of one thing that could save me. Google told that, the thing was partillerocken. I knew that it had everything that a candidate would require for 310-202 exam of 310-202 and that helped me in achieving good scores in the 310-202 exam.

310-202 real question bank is Exact study, Exact Result.

partillerocken offers reliable IT exam stuff, i have been the usage of them for years. This exam is no exception: I passed 310-202 using partillerocken questions/answers and exam simulator. The whole lot people say is right: the questions are real, that is a totally reliable braindump, genuinely valid. And i have simplest heard appropriate matters about their customer service, however for my part I by no means had problems that might lead me to the touch them inside the first vicinity. Actually tremendous.

what is pass ratio of 310-202 exam?

Im very masses happy along with your test papers particularly with the solved issues. Your test papers gave me courage to seem in the 310-202 paper with self assurance. The end result is seventy seven.25%. Over again I complete heartedly thank the partillerocken employer. No other manner to pass the 310-202 exam apart from partillerocken model papers. I in my view cleared distinct test with the help of partillerocken question economic organization. I suggest it to each one. If you need to pass the 310-202 exam then take partillerocken help.

Prepare these 310-202 real exam questions and feel confident.

I handed 310-202 certification with ninety one percentage marks. Your braindumps are very similar to actual exam. Thank you for your greatassist. I am capable of keep to use your dumps for my subsequent certifications. At the same time as i used to be hopeless that i cant emerge as an IT licensed; my pal advised me about you; I attempted your on line education equipment for my 310-202 examand emerge as capable of get a 91 result in exam. I personal way to partillerocken.

Get value pack of knowledge to prepare 310-202 exam.

A a part of the education are incredibly tough however I understand them utilizing the partillerocken Q&A and exam Simulator and solved all questions. Essentially as a consequence of it; I breezed through the test horribly basically. Your 310-202 dumps Product are unmatchable in superb and correctness. All the questions to your item had been in the test as nicely. I was flabbergasted to test the exactness of your dump. Plenty obliged over again to your help and all of the assist which you provided to me.

Need something fast preparing for 310-202.

Before I walk to the testing center, I was so confident about my preparation for the 310-202 exam because I knew I was going to ace it and this confidence came to me after using this partillerocken for my assistance. It is very good at assisting students just like it assisted me and I was able to get good scores in my 310-202 test.

See more SUN dumps

310-100 | 310-012 | 310-880 | 310-875 | 310-203 | 310-625 | 310-084 | 311-232 | 310-015 | 310-036 | 310-052 | 310-560 | 310-878 | 310-066 | 310-400 | 310-019 | 310-150 | 310-110 | 311-019 | 310-202 | 310-879 | 310-055 | 310-610 | 310-011 | 310-330 | 310-502 | 310-232 | 310-152 | 310-345 | 310-812 | 310-615 | 310-620 | 310-303 | 310-220 | 310-105 | 310-014 | 310-813 | 310-065 | 310-092 | 310-102 | 310-540 | 310-056 | 212-065 | 310-016 | 212-055 | 310-013 | 310-200 | 310-600 | 310-091 | 310-814 |

Latest Exams added on partillerocken

156-727-77 | 1Z0-936 | 1Z0-980 | 1Z0-992 | 250-441 | 3312 | 3313 | 3314 | 3V00290A | 7497X | AZ-302 | C1000-031 | CAU301 | CCSP | DEA-41T1 | DEA-64T1 | HPE0-J55 | HPE6-A07 | JN0-1301 | PCAP-31-02 | 1Y0-340 | 1Z0-324 | 1Z0-344 | 1Z0-346 | 1Z0-813 | 1Z0-900 | 1Z0-935 | 1Z0-950 | 1Z0-967 | 1Z0-973 | 1Z0-987 | A2040-404 | A2040-918 | AZ-101 | AZ-102 | AZ-200 | AZ-300 | AZ-301 | FortiSandbox | HP2-H65 | HP2-H67 | HPE0-J57 | HPE6-A47 | JN0-662 | MB6-898 | ML0-320 | NS0-159 | NS0-181 | NS0-513 | PEGACPBA73V1 | 1Z0-628 | 1Z0-934 | 1Z0-974 | 1Z0-986 | 202-450 | 500-325 | 70-537 | 70-703 | 98-383 | 9A0-411 | AZ-100 | C2010-530 | C2210-422 | C5050-380 | C9550-413 | C9560-517 | CV0-002 | DES-1721 | MB2-719 | PT0-001 | CPA-REG | CPA-AUD | AACN-CMC | AAMA-CMA | ABEM-EMC | ACF-CCP | ACNP | ACSM-GEI | AEMT | AHIMA-CCS | ANCC-CVNC | ANCC-MSN | ANP-BC | APMLE | AXELOS-MSP | BCNS-CNS | BMAT | CCI | CCN | CCP | CDCA-ADEX | CDM | CFSW | CGRN | CNSC | COMLEX-USA | CPCE | CPM | CRNE | CVPM | DAT | DHORT | CBCP | DSST-HRM | DTR | ESPA-EST | FNS | FSMC | GPTS | IBCLC | IFSEA-CFM | LCAC | LCDC | MHAP | MSNCB | NAPLEX | NBCC-NCC | NBDE-I | NBDE-II | NCCT-ICS | NCCT-TSC | NCEES-FE | NCEES-PE | NCIDQ-CID | NCMA-CMA | NCPT | NE-BC | NNAAP-NA | NRA-FPM | NREMT-NRP | NREMT-PTE | NSCA-CPT | OCS | PACE | PANRE | PCCE | PCCN | PET | RDN | TEAS-N | VACC | WHNP | WPT-R | 156-215-80 | 1D0-621 | 1Y0-402 | 1Z0-545 | 1Z0-581 | 1Z0-853 | 250-430 | 2V0-761 | 700-551 | 700-901 | 7765X | A2040-910 | A2040-921 | C2010-825 | C2070-582 | C5050-384 | CDCS-001 | CFR-210 | NBSTSA-CST | E20-575 | HCE-5420 | HP2-H62 | HPE6-A42 | HQT-4210 | IAHCSMM-CRCST | LEED-GA | MB2-877 | MBLEX | NCIDQ | VCS-316 | 156-915-80 | 1Z0-414 | 1Z0-439 | 1Z0-447 | 1Z0-968 | 300-100 | 3V0-624 | 500-301 | 500-551 | 70-745 | 70-779 | 700-020 | 700-265 | 810-440 | 98-381 | 98-382 | 9A0-410 | CAS-003 | E20-585 | HCE-5710 | HPE2-K42 | HPE2-K43 | HPE2-K44 | HPE2-T34 | MB6-896 | VCS-256 | 1V0-701 | 1Z0-932 | 201-450 | 2VB-602 | 500-651 | 500-701 | 70-705 | 7391X | 7491X | BCB-Analyst | C2090-320 | C2150-609 | IIAP-CAP | CAT-340 | CCC | CPAT | CPFA | APA-CPP | CPT | CSWIP | Firefighter | FTCE | HPE0-J78 | HPE0-S52 | HPE2-E55 | HPE2-E69 | ITEC-Massage | JN0-210 | MB6-897 | N10-007 | PCNSE | VCS-274 | VCS-275 | VCS-413 |

See more dumps on partillerocken

DC0-260 | 301 | VCS-322 | 70-713 | ST0-47X | 9L0-060 | FPGEE | 1Z0-574 | HP2-H18 | HP0-791 | NS0-501 | 000-M222 | 3C00120A | JN0-314 | A00-203 | 000-N10 | 000-399 | 9A0-031 | 70-348 | 156-115.77 | CWDP-302 | HP2-K27 | 1Z0-160 | 1Z0-429 | 000-009 | TB0-119 | HP0-276 | C9560-023 | 642-270 | SC0-402 | P2050-007 | NS0-330 | 1Z0-536 | LOT-924 | 000-M39 | CDM | M2150-810 | EX0-110 | A2090-610 | 210-065 | 644-337 | F50-515 | NCEES-FE | 1Z0-045 | ICBB | E20-533 | LOT-829 | 000-634 | CA0-002 | 70-462 |

310-202 Questions and Answers

Pass4sure 310-202 dumps | Killexams.com 310-202 real questions | [HOSTED-SITE]

310-202 Certified System Administrator for the Solaris 10 OS, Part ll

Study Guide Prepared by Killexams.com SUN Dumps Experts

Exam Questions Updated On :



Killexams.com 310-202 Dumps and Real Questions

100% Real Questions - Exam Pass Guarantee with High Marks - Just Memorize the Answers



310-202 exam Dumps Source : Certified System Administrator for the Solaris 10 OS, Part ll

Test Code : 310-202
Test Name : Certified System Administrator for the Solaris 10 OS, Part ll
Vendor Name : SUN
Q&A : 558 Real Questions

exceptional to hear that real test questions of 310-202 exam are supplied here.
Its a completely beneficial platform for running professionals like us to practice the questions and answers everywhere. I am very tons thankful to you human beings for creating this kind of incredible practice questions which turned into very useful to me inside the ultimate days of exams. I actually have secured 88% marks in 310-202 Exam and the revision practice tests helped me loads. My inspiration is that please expand an android app in order that people like us can exercise the exams even as journeying additionally.


i am very happy with this 310-202 study manual.
Im so glad i bought 310-202 exam prep. The 310-202 exam is hard due to the fact its very massive, and the questions cowl the entirety you notice in the blueprint. killexams.com was my most important instruction supply, and that they cowl the whole lot flawlessly, and there had been lots of associated questions about the exam.


Passing the 310-202 exam is not enough, having that knowledge is required.
I passed the 310-202 exam nowadays and scored one hundred%! Never thought I ought to do it, but killexams.com grew to become out to be a gem in exam training. I had an awesome feeling approximately it as it appeared to cowl all topics, and there were plenty of questions provided. Yet, I didnt anticipate to see all of the equal questions inside the real exam. Very nice surprise, and I exceptionally propose the use of Killexams.


How many questions are asked in 310-202 exam?
I passed 310-202 exam. I assume 310-202 certification isnt always given sufficient publicity and PR, on the grounds that its actually rightly however seems to be beneath rated nowadays. that is why there arent many 310-202 braindumps to be had without cost, so I had to purchase this one. killexams.com package grew to become out to be just as tremendous as I expected, and it gave me precisely what I needed to know, no misleading or incorrect info. excellent revel in, high five to the team of developers. You men rock.


right vicinity to locate 310-202 dumps paper.
killexams.com offers reliable IT exam stuff, i have been the usage of them for years. This exam isnt always any exception: I passed 310-202 the usage of killexams.com questions/solutions and exam simulator. Everything human beings say is actual: the questions are genuine, that is a very reliable braindump, definitely valid. And i have simplest heard suitable topics about their customer support, however for my part I never had issues that would lead me to contactthem within the first location. Clearly top notch.


Is there a shortcut to clean 310-202 examination?
this is top notch, I handed my 310-202 exam final week, and one exam earlier this month! As many humans factor out here, these brain dumps are a exquisite way to study, either for the exam, or just for your expertise! On my checks, I had masses of questions, good element I knew all of the solutions!!


attempt out these 310-202 dumps, it is terrific!
way to killexams.com this website online gave me the equipment and self belief I needed to crack the 310-202. The websitehas treasured facts to help you to acquire success in 310-202 manual. In turn I got here to realize approximately the 310-202 education software program. This software program is outlining each subject matter and put query in random order just like the test. you may get marks additionally to help you to evaluate yourself on unique parameters. outstanding


Shortest questions that works in real test environment.
I went crazy when my test was in a week and I lost my 310-202 syllabus. I got blank and wasnt able to figure out how to cope up with the situation. Obviously, we all are aware of the importance the syllabus during the preparation period. It is the only paper which directs the way. When I was almost mad, I got to know about killexams. Cant thank my friend for making me aware of such a blessing. Preparation was much easier with the help of 310-202 syllabus which I got through the site.


What is needed to pass 310-202 exam?
310-202 questions from killexams.com are extremely good, and replicate precisely what check center offers you at the 310-202 exam. I loved everything about the killexams.com coaching material. I handed with over 80%.


So easy questions in 310-202 exam! I was already enough prepared.
I got a good result with this bundle. Very good quality, questions are accurate and I got most of them on the exam. After I have passed it, I recommended killexams.com to my colleagues, and everyone passed their exams, too (some of them took Cisco exams, others did Microsoft, VMware, etc). I have not heard a bad review of killexams.com, so this must be the best IT training you can currently find online.


SUN Certified System Administrator for

Hourly expense for Certification: sun certified device Administrator for Solaris OS | killexams.com Real Questions and Pass4sure dumps

No result found, are trying new keyword!8 unhealthy things That take place to Your body if you Hate Your Job Leah Thomas by the use of Fairygodboss now not loving your job (or quite simply hating it) can cause greater than just disappointment within the office. it could begin ...

sun licensed equipment Administrator: Job Description & necessities | killexams.com Real Questions and Pass4sure dumps

licensed Solaris device directors are assistance know-how (IT) specialists who install and retain community servers operating some of the Solaris operating system at the moment obtainable during the Oracle supplier. they are continually employed by companies and different agencies with laptop networks that use the company's open source software products. As programs administrators, they may additionally also supervise other IT group of workers and reply to questions and renovation requests from office workers.

education Bachelor's diploma in tips know-how or laptop science suggested Job capabilities Troubleshooting, analytical thinking, multitasking, communique revenue range (2019)* $61,390 to $one hundred forty five,437 with solar certified gadget Administrator credentials Job boom (2016-2026)** 6% for community and desktop programs directors

supply: *Payscale, **U.S. Bureau of Labor information

Required schooling

Most methods directors have achieved a Bachelor of Science in advice know-how, computing device Science or a related field. Core coursework customarily contains subject matters in programming languages and techniques, networking and techniques design. Solaris certifications are available during the Oracle enterprise in network, protection and systems administration. necessities consist of a passing ranking on an exam, which candidates can prepare for through enrolling in lessons at the Oracle Academy or an accredited working towards center, reviewing seminar packages and taking apply exams.

capabilities Required

techniques directors are analytical thinkers who're in a position to troubleshoot issues for significant businesses of network device clients. traumatic situations require clear, quick thinking, and can contain working lengthy hours until the problem is mounted. The ability to multitask can be valuable when managing more than one task at a time. communication competencies are key when working with nontechnical body of workers members.

career and income Outlook

The U.S. Bureau of Labor records (BLS) anticipated that jobs for gadget directors in typical will raise by using a regular pace, 6% from 2016 to 2026. certified gadget administrators will savour stunning job possibilities, as agencies more and more depend on full-time professionals to hold their computing device working systems. in response to Payscale.com, certified techniques directors for Solaris operating methods earned between $sixty one,390 and $145,437 in April 2019.


Educators tout merits of countrywide board certification; studies display improved learning | killexams.com Real Questions and Pass4sure dumps

Mike Yell, a seventh grade social experiences teacher at Hudson (Wis.) center faculty, accomplished certification in 2003 and renewed his certificates in 2013. The Wisconsin educator spoke of he would “strongly recommend countrywide board certification to teachers wishing to take on a rigorous growth challenge as a way to in the end increase their practice.”

countrywide board certification for academics, governed by way of the country wide Board for expert instructing specifications in Arlington, Va., has been gaining momentum the previous 25 years. The board presents trainer certification in 16 disciplines and 4 developmental stages to satisfy the needs of just about all of america’s lecturers, in line with the NBPTS site.

countrywide board certification is a voluntary manner that goes beyond entry-level state certification. apart from maintaining a legitimate state educating license, candidates for board certification must dangle a bachelor’s degree from an accepted institution and have three or more years of educating adventure.

country wide certification isn't supposed to change state teaching licenses, but provides a method of promoting and moneymaking accomplished educating.

every certificate area has a collection of specifications developed by way of teachers who're specialists in that area area and developmental level and are in accordance with what the countrywide board calls the 5 Core Propositions. The requisites deliver tips about what proficiencies a candidate must show to obtain certification.

Some faculty districts present extra pay or stipends for teachers who earn country wide board certification. Others give these lecturers extra opportunities for management or skilled increase. Some districts present no rewards and teachers are trying to find certification for private factors.

Angie Jorgensen, fourth grade trainer at Pinecrest basic school in Hastings, Minn., stated one rationale she accomplished the process “turned into economic, as a result of in Hastings, we're one of the crucial districts that pay for national board certification.”

She had also lately entire engaged on her grasp’s degree, so she was in a “rigorous approach,” so moving on with countrywide boards became “a nice transition.”

Jorgensen credited a bunch of veteran lecturers with assisting her work during the technique. “a few of them have been closer to retirement, and they saw this probability to are attempting to substitute themselves as country wide board teachers, to get a few of us younger teachers licensed before they left. They were an important aid.”

Collaboration with other academics is a crucial a part of the country wide board certification procedure and Mike Fuller, band instructor at Meyer middle faculty in River Falls, Wis., stated that “the more I learned in regards to the technique worried, the greater fascinated I became in it. I realized of three other area song lecturers who have been when you consider that working on their country wide boards and the chance to have a built-in network and aid device helped me come to a decision to head for it.”

other teachers are influenced by means of very own increase.

“i am a lifelong learner,” observed Betsy Weis, math teacher at Farmington (Minn.) high college, “and that i wanted to step up to a brand new problem, primarily since I knew it might improve my teaching knowledge.”

lecturers need to use the requisites for his or her certificate enviornment to guide responses to 4 accessories which require candidates to demonstrate content capabilities and instructional methods. Candidates ought to write extensive essays explaining classes in their classrooms, examining their training, and reflecting on the way to increase the instructions. They additionally give videos of themselves educating in their classrooms and take a pc-based verify on their topics.

“The NBC questions are excessive and require one to contemplate scholar records, instructing follow, leadership, collaboration, community involvement, and expertise use,” Weiss referred to. “I found out new and improved how to improve scholar getting to know.”

The procedure can take as little as 365 days to comprehensive, however many teachers choose to unfold it out over three years. The difficult nature of the assessments potential that many candidates have to repeat materials of the technique as a part of the getting to know and growth supported by way of the national board.

“It changed into very time consuming,” noted Mary Rumpel, math branch head at Ellsworth excessive faculty in Pierce County, Wis. “The challenging part turned into that you just had to clarify why you train in the manner that you simply do. for example, in a single part, you had to take a few students and the assignments you provide them, and explain how you get these dynamically distinctive college students to every be taught the discipline area, documenting what you’ve defined.”

She introduced, “it's a huge venture, one as a way to take lots of self-reflection, loads of trials and error, and loads of weekends to do smartly.”

This process additionally requires a financial dedication. the full manner charges $1,900, and many candidates are able to find aid with this from promises, loans, or school district funds. Others pay the fee themselves.

“greater than a decade of research from across the nation confirms that students taught by way of board-licensed lecturers learn greater than college students taught by using other academics,” wrote the countrywide board on its site. They encompass links to a few academic experiences about the results of country wide board certification on college students.

“The national boards procedure concerned looking at what i was already doing in the school room and explaining its influence on pupil researching,” Fuller observed. That required me to think an awful lot about my teaching suggestions and accept as true with how advantageous they have been in helping college students to grow. The 4 papers that candidates are required to write down make you articulate why you do what you do and the way it positively impacts students.”

up to now named national Social reviews teacher of the yr, Yell spoke of the “most critical influence of board certification changed into internalizing the manner of learning and staying on suitable of the scholarship in education in addition to in my content material area, and in the carrying on with process of reflecting on every thing I do within the classroom.”

attaining countrywide board certification was no longer an end for Rumpel, but a starting.

“I consider by using maintaining the certification, I believe like I can't let the students down,” she referred to. “I need to hold challenging myself each yr and work out how to maintain getting superior.”

When Tim Collins, superintendent of Hastings Public colleges,interviews new lecturers, he noted he is attempting to find “a strong work ethic and the desire to grow professionally for a lifetime. academics who come to a decision to head during the national board certification manner exemplify those two features.”

these teachers frequently supply a positive function mannequin for other teachers of their constructions and districts.

“When an individual grows professionally, they carry that stage of confidence and most fulfilling practices to their colleagues each without delay and not directly,” Collins said. “The method of country wide board certification helps a teacher to become better informed in their follow, reflective in the school room, and typical support their very own teaching innovations.”

For more counsel about national board certification, see the web site for the national Board for knowledgeable instructing specifications at www.nbpts.org/


Obviously it is hard assignment to pick solid certification questions/answers assets concerning review, reputation and validity since individuals get sham because of picking incorrectly benefit. Killexams.com ensure to serve its customers best to its assets concerning exam dumps update and validity. The vast majority of other's sham report objection customers come to us for the brain dumps and pass their exams cheerfully and effectively. We never trade off on our review, reputation and quality because killexams review, killexams reputation and killexams customer certainty is vital to us. Uniquely we deal with killexams.com review, killexams.com reputation, killexams.com sham report grievance, killexams.com trust, killexams.com validity, killexams.com report and killexams.com scam. In the event that you see any false report posted by our rivals with the name killexams sham report grievance web, killexams.com sham report, killexams.com scam, killexams.com dissension or something like this, simply remember there are constantly terrible individuals harming reputation of good administrations because of their advantages. There are a great many fulfilled clients that pass their exams utilizing killexams.com brain dumps, killexams PDF questions, killexams hone questions, killexams exam simulator. Visit Killexams.com, our specimen questions and test brain dumps, our exam simulator and you will realize that killexams.com is the best brain dumps site.

[OPTIONAL-CONTENTS-2]


HP0-J20 Practice test | HP0-797 test questions | 312-49v8 braindumps | 1Y1-A15 exam prep | 642-654 mock exam | HP0-D05 Practice Test | HP0-728 exam questions | 000-530 exam prep | LOT-840 braindumps | 1Z0-992 examcollection | 310-101 study guide | 1Z0-588 brain dumps | 010-002 practice test | TM12 cram | E20-624 test prep | 640-461 dumps questions | PCCN real questions | 1Z0-518 practice exam | VCP550PSE dump | 70-537 cheat sheets |


310-202 Real Exam Questions by killexams.com
killexams.com satisfied with our acknowledgment of helping individuals pass the 310-202 test of their first attempt. Our accomplishments inside the previous two years have been completely wonderful, path to our happy clients who are presently ready to support their vocation inside the rapid path. killexams.com is the main decision among IT experts, particularly the ones who are hoping to ascend the chain of importance runs quicker of their individual enterprises.

We have our specialists operating ceaselessly for the gathering of real test questions of 310-202. All the pass4sure Questions and Answers of 310-202 gathered by our crew are verified and updated through our SUN certified team. we have an approach to keep connected to the candidates regarded within the 310-202 exam to induce their evaluations just about the 310-202 exam, we have an approach to collect 310-202 exam tips and hints, their fancy just about the techniques used at intervals the important 310-202 exam, the errors they accomplished within the actual test once that enhance our braindumps consequently. Click http://killexams.com/pass4sure/exam-detail/310-202 Once you bear our pass4sure Questions and Answers, you will feel assured regarding all the themes of test and knowledge that your power has been greatly improved. These pass4sure Questions and Answers are not merely exercise questions, these are real test Questions and Answers which will be sufficient to pass the 310-202 exam first attempt. killexams.com Discount Coupons and Promo Codes are as under; WC2017 : 60% Discount Coupon for all exams on website PROF17 : 10% Discount Coupon for Orders larger than $69 DEAL17 : 15% Discount Coupon for Orders over $99 SEPSPECIAL : 10% Special Discount Coupon for All Orders

killexams.com helps a great many hopefuls pass the exams and get their certifications. We have a great many successful surveys. Our dumps are solid, moderate, updated and of extremely best quality to conquer the challenges of any IT certifications. killexams.com exam dumps are most recent updated in exceptionally bulldoze way on normal premise and material is discharged intermittently. Most recent killexams.com dumps are accessible in testing focuses with whom we are keeping up our relationship to get most recent material.

The killexams.com exam inquiries for 310-202 Certified System Administrator for the Solaris 10 OS, Part ll exam is chiefly Considering two available organizations, PDF and Practice questions. PDF record conveys all the exam questions, answers which makes your readiness less demanding. While the Practice questions are the complimentary element in the exam item. Which serves to self-survey your advancement. The assessment device additionally addresses your feeble territories, where you have to put more endeavors with the goal that you can enhance every one of your worries.

killexams.com prescribe you to must attempt its free demo, you will see the natural UI and furthermore you will think that its simple to tweak the arrangement mode. In any case, ensure that, the genuine 310-202 item has a bigger number of highlights than the preliminary variant. On the off chance that, you are satisfied with its demo then you can buy the genuine 310-202 exam item. Benefit 3 months Free endless supply of 310-202 Certified System Administrator for the Solaris 10 OS, Part ll Exam questions. killexams.com offers you three months free endless supply of 310-202 Certified System Administrator for the Solaris 10 OS, Part ll exam questions. Our master group is constantly accessible at back end who updates the substance as and when required.

killexams.com Huge Discount Coupons and Promo Codes are as under;
WC2017: 60% Discount Coupon for all exams on website
PROF17: 10% Discount Coupon for Orders greater than $69
DEAL17: 15% Discount Coupon for Orders greater than $99
DECSPECIAL: 10% Special Discount Coupon for All Orders


[OPTIONAL-CONTENTS-4]


Killexams A2010-571 exam prep | Killexams 920-804 brain dumps | Killexams 000-864 free pdf | Killexams 000-080 Practice Test | Killexams HP3-X09 test prep | Killexams 646-580 study guide | Killexams HAT-050 braindumps | Killexams HP3-C36 questions and answers | Killexams LOT-926 exam prep | Killexams HH0-500 questions and answers | Killexams 000-N31 free pdf | Killexams HP2-Z06 practice test | Killexams LOT-412 braindumps | Killexams E20-593 dumps | Killexams MB2-706 test prep | Killexams NCLEX-PN pdf download | Killexams 000-M221 brain dumps | Killexams ST0-100 practice test | Killexams LOT-987 mock exam | Killexams 98-382 examcollection |


[OPTIONAL-CONTENTS-5]

View Complete list of Killexams.com Brain dumps


Killexams 000-737 brain dumps | Killexams 000-753 mock exam | Killexams LOT-840 practice questions | Killexams 000-204 braindumps | Killexams ST0-095 sample test | Killexams EX0-007 questions answers | Killexams AZ-302 real questions | Killexams HP0-277 cram | Killexams 1Z0-043 braindumps | Killexams 000-994 free pdf download | Killexams C2140-047 practice test | Killexams 642-964 study guide | Killexams HP0-S24 test prep | Killexams HP0-A23 test prep | Killexams 000-M602 bootcamp | Killexams HP5-B05D VCE | Killexams GPTS practice exam | Killexams LOT-801 practice test | Killexams 1Z0-590 Practice test | Killexams CAT-180 free pdf |


Certified System Administrator for the Solaris 10 OS, Part ll

Pass 4 sure 310-202 dumps | Killexams.com 310-202 real questions | [HOSTED-SITE]

Disk Slices | killexams.com real questions and Pass4sure dumps

This chapter is from the book 

Disks are divided into regions called “disk slices” or “disk partitions.” A slice is composed of a single range of contiguous blocks. It is a physical subset of the disk (except for slice 2, which represents the entire disk). A UFS or the swap area is built within these disk slices. The boundaries of a disk slice are defined when a disk is partitioned using the format utility, and the slice information for a particular disk can be viewed by using the prtvtoc command. Each disk slice appears to the OS (and to the system administrator) as though it were a separate disk drive.

Disk slicing differs between the SPARC and x86 platforms. On the SPARC platform, the entire disk is devoted to the OS; the disk can be divided into 8 slices, numbered 0 to 7. On the x86 platform, the disk is divided into fdisk partitions using the fdisk command. The fdisk partition is divided into 10 slices, numbered 0 to 9.

A physical disk consists of a stack of circular platters. Data is stored on these platters in a cylindrical pattern called “cylinders” as illustrated in Figure 4-1. Cylinders can be grouped and isolated from one another. A group of cylinders is referred to as a slice. A slice is defined with start and end points, starting from the outside of the platters to the center of the stack of platters, which is called the “spindle.”

For example, a 73GB SCSI disk has 14,087 cylinders, numbered 0 to 14,086. Cylinder 0 is on the outside edge of the platters, and cylinder 14,086 is the closest to the spindle. Disk slices are defined by an offset and a size in cylinders. The offset is the distance from cylinder 0. To define a slice, the administrator provides a starting cylinder and an ending cylinder. A slice spanning from cylinder 0 to 14,086 would use the entire disk and is typical of the slicing scheme used on a ZFS boot disk.

When setting up slices, remember these rules:

  • Each disk slice holds only one file system.
  • No file system can span multiple slices without the use of a volume manager such as ZFS or SVM.
  • After a file system is created, its size cannot be increased or decreased without repartitioning and possibly destroying the partition directly before or after it.
  • Slices cannot span multiple disks; however, multiple swap slices on separate disks are allowed.
  • When we discuss ZFS in Chapter 5, you’ll learn how to get around some of these limitations in file systems.

    Displaying Disk Configuration Information

    As described earlier, disk configuration information is stored in the disk label. If you know the disk and slice number, you can display information for a disk by using the print volume table of contents (prtvtoc) command. You can specify the volume by specifying any slice defined on the disk (for example, /dev/rdsk/c0t3d0s2 or /dev/rdsk/c0t3d0s*). Regardless of which slice you specify, all slices defined on the disk will be displayed. If you know the target number of the disk but do not know how it is divided into slices, you can show information for the entire disk by specifying either slice 2 or s*. The following steps show how you can examine information stored on a disk’s label by using the prtvtoc command.

  • Become the superuser.
  • Type the following text and press Enter.

    # prtvtoc /dev/rdsk/c2t0d0s2<cr>

    The system responds with the following:

    * /dev/rdsk/c2t0d0s2 partition map * * Dimensions: * 512 bytes/sector * 424 sectors/track * 24 tracks/cylinder * 10176 sectors/cylinder * 14089 cylinders * 14087 accessible cylinders * * Flags: * 1: unmountable * 10: read-only * * Unallocated space: * First Sector Last * Sector Count Sector * 0 10176 10175 * * First Sector Last * Partition Tag Flags Sector Count Sector Mount Directory 0 2 00 10176 143339136 143349311 2 5 01 0 143349312 143349311
  • The disk described is a SAS disk, target 0 with an SMI VTOC label. The prtvtoc command shows the number of cylinders and heads, as well as how the disk’s slices are arranged.

    The following is an example of running the prtvtoc command on a SCSI disk with an EFI label:

    # prtvtoc /dev/rdsk/c2t1d0s1<cr> * /dev/rdsk/c2t1d0s1 partition map * * Dimensions: * 512 bytes/sector * 8385121 sectors * 8385054 accessible sectors * * Flags: * 1: unmountable * 10: read-only * * First Sector Last * Partition Tag Flags Sector Count Sector Mount Directory 0 2 01 34 41006 41039 1 2 00 41040 8327663 8368702 /mnt 8 11 00 8368703 16384 8385086 Using the format Utility to Create Slices: SPARC

    Before you can create a file system on a disk, the disk must be formatted, and you must divide it into slices using the format utility. Formatting involves two separate processes:

  • Writing format information to the disk
  • Completing a surface analysis, which compiles an up-to-date list of disk defects
  • When a disk is formatted, header and trailer information is superimposed on the disk. When the format utility runs a surface analysis, the controller scans the disk for defects. It should be noted that defects and formatting information reduce the total disk space available for data. This is why a new disk usually holds only 90% to 95% of its capacity after formatting. This percentage varies according to disk geometry and decreases as the disk ages and develops more defects.

    The need to perform a surface analysis on a disk drive has dropped as more manufacturers ship their disk drives formatted and partitioned. You should not need to perform a surface analysis within the format utility when adding a disk drive to an existing system unless you think disk defects are causing problems. The primary reason that you would use format is if you want to view or change the partitioning scheme on a disk.

    The format utility searches your system for all attached disk drives and reports the following information about the disk drives it finds:

  • Target location
  • Disk geometry
  • Whether the disk is formatted
  • Whether the disk has mounted partitions
  • In addition, the format utility is used in disk repair operations to do the following:

  • Retrieve disk labels
  • Repair defective sectors
  • Format and analyze disks
  • Partition disks
  • Label disks (i.e., write the disk name and configuration information to the disk for future retrieval)
  • The installation program partitions and labels disk drives as part of installing the Oracle Solaris release. However, you might need to use the format utility when doing the following:

  • Displaying slice information
  • Dividing a disk into slices
  • Formatting a disk drive when you think disk defects are causing problems
  • Repairing a disk drive
  • Changing a disk label from EFI to SMI or vice versa
  • The following example uses the format utility to create disk slices on a disk.

  • Become the superuser
  • Type “code.”

    The system responds with the following:

    Searching for disks ... done AVAILABLE DISK SELECTIONS: 0. c0t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107> /pci@1f,0/pci@1/scsi@8/sd@0,0 1. c0t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107> /pci@1f,0/pci@1/scsi@8/sd@1,0
  • Specify the disk (enter its number).

    The system responds with the format main menu:

    FORMAT MENU: disk - select a disk type - select (define) a disk type partition - select (define) a partition table current - describe the current disk format - format and analyze the disk repair - repair a defective sector label - write label to the disk analyze - surface analysis defect - defect list management backup - search for backup labels verify - read and display labels save - save new disk/partition definitions inquiry - show vendor, product and revision volname - set 8-character volume name !<cmd> - execute <cmd>, then return quit

    Table 4-4 describes the format main menu items.

    Table 4-4 Format Main Menu Item Descriptions

    Menu Item

    Description

    disk

    Lists all of the system’s drives. Also lets you choose the disk you want to use in subsequent operations. This disk is referred to as the current disk.

    type

    Identifies the manufacturer and model of the current disk. Also displays a list of known drive types. Choose the Auto configure option for all SCSI-2 disk drives.

    partition

    Creates and modifies slices.

    current

    Describes the current disk (that is, device name, device type, number of cylinders, alternate cylinders, heads, sectors, and physical device name).

    format

    Formats the current disk using one of these sources of information in this order:

    Information that is found in the format.dat file.

    Information from the automatic configuration process.

    Information that you type at the prompt if no format.dat entry exists.

    This command does not apply to IDE disks. IDE disks are preformatted by the manufacturer.

    fdisk

    x86 platform only: Runs the fdisk program to create an Oracle Solaris fdisk partition.

    repair

    Used to repair a specific block on the current disk.

    label

    Writes a new label to the current disk. This is not the same as labeling the disk with volname.

    analyze

    Runs read, write, and compare tests.

    defect

    Retrieves and displays defect lists. This feature does not apply to IDE disks. IDE disks manage defects automatically.

    backup

    Searches for backup labels if the VTOC becomes corrupted or gets deleted.

    verify

    Displays information about the current disk such as device name, device type, number of cylinders, alternate cylinders, heads, sectors, and partition table.

    save

    Saves new disk and partition information.

    inquiry

    SCSI disks only: Displays the vendor, product name, and revision level of the current drive. This will also display the disk’s current firmware.

    volname

    Labels the disk with a new eight-character volume name that you specify. This is not the same as writing the partition table to disk using label.

    quit

    Exits the format menu. Pressing Ctrl+D will also exit the format utility from the main menu or from any submenu.

  • Type “partition” at the format prompt. The partition menu is displayed.

    format> partition<cr> PARTITION MENU: 0 - change '0' partition 1 - change '1' partition 2 - change '2' partition 3 - change '3' partition 4 - change '4' partition 5 - change '5' partition 6 - change '6' partition 7 - change '7' partition select - select a predefined table modify - modify a predefined partition table name - name the current table print - display the current table label - write partition map and label to the disk !<cmd> - execute <cmd>, then return quit
  • Type “print” to display the current partition map.

    partition> print<cr>

    The system responds with the following:

    Current partition table (original): Total disk cylinders available: 24620 + 2 (reserved cylinders) Part Tag Flag Cylinders Size Blocks 0 root wm 1418 - 9924 11.72GB (8507/0/0) 24576723 1 var wm 9925 - 13469 4.88GB (3545/0/0) 10241505 2 backup wm 0 - 24619 33.92GB (24620/0/0) 71127180 3 swap wu 0 - 1417 1.95GB (1418/0/0) 4096602 4 unassigned wm 13470 - 14887 1.95GB (1418/0/0) 4096602 5 unassigned wm 14888 - 16112 1.69GB (1225/0/0) 3539025 6 unassigned wm 16113 - 16821 1000.15MB (709/0/0) 2048301 7 home wm 16822 - 23910 9.77GB (7089/0/0) 20480121

    The columns displayed with the partition table are

  • Part: The slice number (0–7).
  • Tag: This is an optional value that indicates how the slice is being used. The value can be any of the following names that best fits the function of the file system you are creating:

    unassigned, boot, root, swap, usr, backup, stand, var, home, alternates, reserved, system, BIOS_boot

  • Flag: Values in this column can be

  • wm The disk slice is writable and mountable.
  • wu The disk slice is writable and unmountable (such as a swap slice).
  • rm The disk slice is read-only and mountable.
  • ru The disk slice is read-only and unmountable.
  • Cylinders: The starting and ending cylinder number for the disk slice.
  • Size: The slice size specified as

  • mb megabytes
  • gb gigabytes
  • b blocks
  • c cylinders
  • b Blocks
  • e Ending cylinder
  • You can use the name and save commands in the partition menu to name and save a newly created partition table to a file that can be referenced by name later, when you want to use this same partition scheme on another disk. When issuing the name command, you’ll provide a unique name for this partition scheme and then issue the save command to save the information to the ./format.dat file. Normally this file is located in the /etc directory, so provide the full pathname for /etc/format.dat to update the master file.

  • After you partition the disk, you must label it by typing label at the partition prompt:

    partition> label<cr>

    You are asked for confirmation on labeling the disk as follows:

    Ready to label disk, continue? y<cr>

    Enter “Y” to continue.

  • After labeling the disk, type “quit” to exit the partition menu or press Ctrl+D to exit the format utility:

    partition> quit<cr>
  • Type “quit” again to exit the format utility:

    format> quit<cr>
  • It’s important to point out a few undesirable things that can happen when defining disk partitions with the format utility if you’re not careful. First, be careful not to waste disk space. Wasted disk space can occur when you decrease the size of one slice and do not adjust the starting cylinder number of the adjoining disk slice.

    Second, don’t overlap disk slices. Overlapping occurs when one or more cylinders are allocated to more than one disk slice. For example, increasing the size of one slice without decreasing the size of the adjoining slice will create overlapping partitions. The format utility will not warn you of wasted disk space or overlapping partitions.

    The main reason a system administrator uses the format utility is to divide a disk into disk slices. In Oracle Solaris 11 11/11, for a bootable ZFS root pool, the disks in the pool must contain slices and must be labeled with an SMI label. The simplest configuration would be to put the entire disk capacity in slice 0 and use that slice for the root pool. Bootable ZFS root pools are discussed further in Chapter 5.

    I’ll describe how to use the SMI label for SPARC-based systems. For example, on a SPARC-based system with a 72GB disk, you would need to have 68GB of usable space located in slice 0. Similarly, on an x86-based system with a 72GB disk, you would also need to allow 68GB of usable space located in slice 0. A small amount of boot information is contained in slice 8. Slice 8 requires no administration and cannot be changed.

    Follow these steps to partition a disk (c2t0d0) to be used as a ZFS boot disk (bootable ZFS root pool) on a SPARC-based system. If the disk has an EFI label, and the firmware has not been upgraded, you must first convert it to an SMI label.

    Use the prtvtoc command to verify the disk label as follows:

    # prtvtoc /dev/rdsk/c2t0d0s2<cr>

    The system displays

    Part Tag Flag Cylinders Size Blocks 0 root wm 1 - 14086 68.35GB (14086/0/0) 143339136 1 unassigned wm 0 0 (0/0/0) 0 2 backup wu 0 - 14086 68.35GB (14087/0/0) 143349312 3 unassigned wm 0 0 (0/0/0) 0 4 unassigned wm 0 0 (0/0/0) 0 5 unassigned wm 0 0 (0/0/0) 0 6 unassigned wm 0 0 (0/0/0) 0 7 unassigned wm 0 0 (0/0/0) 0

    Notice that slice 2 is labeled “backup” and the slices are numbered 0-7. This is an SMI label.

    The following shows the output that is displayed for a disk with an EFI label:

    Part Tag Flag First Sector Size Last Sector 0 usr wm 34 68.36GB 143358320 1 unassigned wm 0 0 0 2 unassigned wm 0 0 0 3 unassigned wm 0 0 0 4 unassigned wm 0 0 0 5 unassigned wm 0 0 0 6 unassigned wm 0 0 0 7 unassigned wm 0 0 0 8 reserved wm 143358321 8.00MB 143374704

    Notice there is a slice 8 and slice 2 is NOT labeled “backup.” This is an EFI label and would need to be changed. Use the following steps to change the label from an EFI label to an SMI label:

  • As root, use the format -e command and select the disk to label as follows:

    # format –e<cr>

    The system displays a list of disks. In the example, I selected disk 1 (c2t1d0):

    Searching for disks ... done AVAILABLE DISK SELECTIONS: 0. c2t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> /pci@780/pci@0/pci@9/scsi@0/sd@0,0 1. c2t1d0 <SEAGATE-ST973402SSUN72G-0603-68.37GB> /pci@780/pci@0/pci@9/scsi@0/sd@1,0 Specify disk (enter its number): 1<cr> selecting c2t1d0 [disk formatted]
  • The main menu is displayed. Type “label” to label the disk:

    FORMAT MENU: disk - select a disk type - select (define) a disk type partition - select (define) a partition table current - describe the current disk format - format and analyze the disk repair - repair a defective sector label - write label to the disk analyze - surface analysis defect - defect list management backup - search for backup labels verify - read and display labels inquiry - show disk ID scsi - independent SCSI mode selects cache - enable, disable or query SCSI disk cache volname - set 8-character volume name !<cmd> - execute <cmd>, then return quit format> label<cr>
  • Select option 1 to label the disk with an SMI label and press Enter when prompted for autoconfiguration:

    [0] SMI Label [1] EFI Label Specify Label type[1]: 0<cr> Auto configuration via format.dat[no]?<cr> Auto configuration via generic SCSI-2[no]?<cr> format>
  • Exit the format utility.

    format> quit<cr>
  • To slice the disk so that it can be used as a ZFS boot disk, follow these steps:

  • As root, enter the format utility:

    # format<cr> Searching for disks ... done

    Select the disk that is going to be sliced. In the example, I will select disk 1 (c2t1d0):

    AVAILABLE DISK SELECTIONS: 0. c2t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> /pci@780/pci@0/pci@9/scsi@0/sd@0,0 1. c2t1d0 <SEAGATE-ST973402SSUN72G-0603-68.37GB> /pci@780/pci@0/pci@9/scsi@0/sd@1,0 Specify disk (enter its number): 1<cr>

    The system responds with

    selecting c2t1d0 [disk formatted]
  • Type “partition” at the format prompt. The partition menu is displayed.

    format> partition<cr> PARTITION MENU: 0 - change '0' partition 1 - change '1' partition 2 - change '2' partition 3 - change '3' partition 4 - change '4' partition 5 - change '5' partition 6 - change '6' partition 7 - change '7' partition select - select a predefined table modify - modify a predefined partition table name - name the current table print - display the current table label - write partition map and label to the disk !<cmd> - execute <cmd>, then return quit
  • Type “print” to display the current partition map.

    partition> print<cr>

    The system responds with the following:

    partition> print<cr> Current partition table (original): Total disk cylinders available: 14087 + 2 (reserved cylinders) Part Tag Flag Cylinders Size Blocks 0 root wm 0 - 25 129.19MB (26/0/0) 264576 1 swap wu 26 - 51 129.19MB (26/0/0) 264576 2 backup wu 0 - 14086 68.35GB (14087/0/0) 143349312 3 unassigned wm 0 0 (0/0/0) 0 4 unassigned wm 0 0 (0/0/0) 0 5 unassigned wm 0 0 (0/0/0) 0 6 usr wm 52 - 14086 68.10GB (14035/0/0) 142820160 7 unassigned wm 0 0 (0/0/0) 0 partition>
  • Enter “modify” to change the partition table:

    partition> modify<cr>
  • Select option 1 for “All Free Hog” when prompted:

    Select partitioning base: 0. Current partition table (original) 1. All Free Hog Choose base (enter number) [0]? 1<cr> Part Tag Flag Cylinders Size Blocks 0 root wm 0 0 (0/0/0) 0 1 swap wu 0 0 (0/0/0) 0 2 backup wu 0 - 14086 68.35GB (14087/0/0) 143349312 3 unassigned wm 0 0 (0/0/0) 0 4 unassigned wm 0 0 (0/0/0) 0 5 unassigned wm 0 0 (0/0/0) 0 6 usr wm 0 0 (0/0/0) 0 7 unassigned wm 0 0 (0/0/0) 0
  • Type “yes” when asked whether to continue:

    Do you wish to continue creating a new partition table based on above table[yes]? yes<cr>

    Type “0” for the Free Hog partition:

    Free Hog partition[6]? 0<cr>
  • The system will prompt you to enter a size for each partition. Press Enter when prompted as follows, and each slice will be 0MB:

    Enter size of partition '1' [0b, 0c, 0.00mb, 0.00gb]:<cr> Enter size of partition '3' [0b, 0c, 0.00mb, 0.00gb]:<cr> Enter size of partition '4' [0b, 0c, 0.00mb, 0.00gb]:<cr> Enter size of partition '5' [0b, 0c, 0.00mb, 0.00gb]:<cr> Enter size of partition '6' [0b, 0c, 0.00mb, 0.00gb]:<cr> Enter size of partition '7' [0b, 0c, 0.00mb, 0.00gb]:<cr>

    Because all of the slices have been set to “0,” the free hog space is the entire disk. This space will be allocated to slice 0 as specified in step 6.

  • When prompted to make this the current partition table, press Enter to use the default value “yes”:

    Okay to make this the current partition table[yes]?<cr>
  • When prompted for a table name, enter “rootdisk.” This name is not significant and can be any name.

    Enter table name (remember quotes): rootdisk<cr>

    Enter “pr” to display the new partition table:

    partition> pr<cr> Current partition table (unnamed): Total disk cylinders available: 14087 + 2 (reserved cylinders) Part Tag Flag Cylinders Size Blocks 0 root wm 0 - 14086 68.35GB (14087/0/0) 143349312 1 swap wu 0 0 (0/0/0) 0 2 backup wu 0 - 14086 68.35GB (14087/0/0) 143349312 3 unassigned wm 0 0 (0/0/0) 0 4 unassigned wm 0 0 (0/0/0) 0 5 unassigned wm 0 0 (0/0/0) 0 6 usr wm 0 0 (0/0/0) 0 7 unassigned wm 0 0 (0/0/0) 0 partition>

    Notice that slice 0 is the entire disk.

  • Enter “quit” or press Ctrl+D to exit the format utility.

    partition> quit<cr>
  • Using the format Utility to Create Slices: x86

    As described earlier in this chapter, Oracle Solaris on the x86 platform treats disk drives slightly differently than on the SPARC-based systems. Disks on the x86 platform must have an fdisk partition table. The x86-based systems use the fdisk partition table to identify parts of the disk reserved for different OSs and to identify the partition that the system will boot from. This boot partition is referred to as the “active disk” partition. You can assign one fdisk partition on a disk to be used for Oracle Solaris.

    On an x86-based system, once a disk drive has been physically installed and verified as working, you’ll use the format command to slice the disk, but first an fdisk partition must be created on the new drive. You can create this fdisk partition using the fdisk command from the command line or through the format utility. The following steps describe how to create a fixed disk partition table on a disk using the format utility:

  • As root, type “format” to get into the format utility.

    # format<cr>

    The following menu appears:

    AVAILABLE DISK SELECTIONS: 0. c1t0d0 <FUJITSU-M1606S-512-6234 cyl 3455 alt 2 hd 6 sec 102> /pci@0,0/pci9004,8178@3/cmdk@0,0 1. c1t1d0 <IBM-DFHSS1W!e-4141 cyl 4071 alt 2 hd 4 sec 135> /pci@0,0/pci9004,8178@3/cmdk@1,0 2. c1t2d0 <DEFAULT cyl 2928 alt 2 hd 6 sec 120> /pci@0,0/pci9004,8178@3/cmdk@2,0 Specify disk (enter its number):
  • Enter the number corresponding to the new drive and the following menu will be displayed:

    FORMAT MENU: disk - select a disk type - select (define) a disk type partition - select (define) a partition table current - describe the current disk format - format and analyze the disk fdisk - run the fdisk program repair - repair a defective sector label - write label to the disk analyze - surface analysis defect - defect list management backup - search for backup labels verify - read and display labels save - save new disk/partition definitions inquiry - show vendor, product and revision volname - set 8-character volume name5 quit format>
  • Select the fdisk option and the following menu appears:

    The recommended default partitioning for your disk is: a 100% "SOLARIS System" partition. To select this, please type "y". To partition your disk differently, type "n" and the "fdisk" program will let you select other partitions.
  • If you wish to use the entire drive for Oracle Solaris, enter “Y.” This will return you to the format menu. If “N” is entered, the fdisk menu will be displayed.

    Total disk size is 4073 cylinders Cylinder size is 540 (512 byte) blocks Cylinders Partition Status Type Start End Length ========= ====== ======== ===== === ====== === THERE ARE NO PARTITIONS CURRENTLY DEFINED SELECT ONE OF THE FOLLOWING: 1. Create a partition 2. Change Active (Boot from) partition 3. Delete a partition 4. Exit (Update disk configuration and exit) 5. Cancel (Exit without updating disk configuration) Enter Selection:
  • Choose 1 to create an fdisk partition. This is not the same as a slice.
  • After creating the partition, choose 4 to exit and save. The format menu will return.
  • Choose partition and follow the procedure for formatting a disk on page 272, beginning at step 4.
  • Disks on x86-based systems can be divided into 10 slices labeled slice 0 through slice 9. On Oracle Solaris 11/11, slices 0 through 7 are used for the same purposes as disk slices found on SPARC-based systems. Slice 2 represents all of the space within the fdisk partition. As stated earlier, slices 8 and 9 are used for purposes specific to x86-based hardware. You cannot modify slices 8 and 9 using the format utility. Beginning with Oracle Solaris 11.1, the boot disk on an x86-based system can contain an EFI label, and the partition scheme is slightly different than the SPARC system. Slice 0 is reserved for the BIOS_boot information. I’ll describe this more in the next chapter.

    Here’s an example of the partition table on an IDE or SATA disk on an x86-based system running Oracle Solaris 11/11, as displayed by the format utility:

    Part Tag Flag Cylinders Size Blocks (output omitted) 8 boot wu 0 - 0 7.84MB (1/0/0) 16065 9 alternates wm 1 - 2 15.69MB (2/0/0) 32130

    In the previous example, notice that slice 9 is defined and tagged as the alternates slice.

    The next example shows the partition table for a SCSI disk attached to an x86-based system. Notice that partition 8 is assigned, but slice 9 is not used:

    Part Tag Flag Cylinders Size Blocks (output omitted) 8 boot wu 0 - 0 7.84MB (1/0/0) 16065 9 unassigned wm 0 0 (0/0/0) 0

    One more item of note: On standard UFSs, don’t change the size of disk slices that are currently in use. When a disk with existing slices is repartitioned and relabeled, any existing data will be lost. Before repartitioning a disk, first copy all of the data to tape or to another disk.

    You can also create the fixed disk partition table on an x86-based system disk from the command line using a single command as follows:

    # fdisk –B c1t0d0<cr>

    The –B option creates a single fixed disk partition that spans the entire disk. The following 36GB disk was formatted using the fdisk –B command:

    Part Tag Flag Cylinders Size Blocks 0 unassigned wm 0 0 (0/0/0) 0 1 unassigned wm 0 0 (0/0/0) 0 2 backup wu 0 - 4695 35.97GB (4696/0/0) 75441240 3 unassigned wm 0 0 (0/0/0) 0 4 unassigned wm 0 0 (0/0/0) 0 5 unassigned wm 0 0 (0/0/0) 0 6 unassigned wm 0 0 (0/0/0) 0 7 unassigned wm 0 0 (0/0/0) 0 8 boot wu 0 - 0 7.84MB (1/0/0) 16065 9 unassigned wm 0 0 (0/0/0) 0

    The fdisk –B command can also be used to convert a disk label from an EFI to SMI.

    To verify that a disk contains a fixed disk partition table, issue the following command:

    # fdisk -v -W - /dev/rdsk/c3t0d0p<cr>

    The system displays the fdisk table for disk c3t0d0:

    * /dev/rdsk/c3t0d0p0 default fdisk table * Dimensions: * 512 bytes/sector * 63 sectors/track * 255 tracks/cylinder * 2088 cylinders * * systid: * 1: DOSOS12 * 2: PCIXOS * 4: DOSOS16 * 5: EXTDOS * 6: DOSBIG * 7: FDISK_IFS * 8: FDISK_AIXBOOT * 9: FDISK_AIXDATA * 10: FDISK_0S2BOOT * 11: FDISK_WINDOWS * 12: FDISK_EXT_WIN * 14: FDISK_FAT95 * 15: FDISK_EXTLBA * 18: DIAGPART * 65: FDISK_LINUX * 82: FDISK_CPM * 86: DOSDATA * 98: OTHEROS * 99: UNIXOS * 100: FDISK_NOVELL2 * 101: FDISK_NOVELL3 * 119: FDISK_QNX4 * 120: FDISK_QNX42 * 121: FDISK_QNX43 * 130: SUNIXOS * 131: FDISK_LINUXNAT * 134: FDISK_NTFSVOL1 * 135: FDISK_NTFSVOL2 * 165: FDISK_BSD * 167: FDISK_NEXTSTEP * 183: FDISK_BSDIFS * 184: FDISK_BSDISWAP * 190: X86BOOT * 191: SUNIXOS2 * 238: EFI_PMBR * 239: EFI_FS * Id Act Bhead Bsect Bcyl Ehead Esect Ecyl Rsect Numsect 191 128 0 1 1 254 63 1023 16065 33527655 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

    When there are multiple disks of the same type (manufacturer, model, size, and geometry) to be sliced, you can save time by copying the label from a source disk over to a target disk without going through all of the steps using the format utility. Use the prtvtoc command to get the partition table from the source disk (c0t0d0) and write the table to the target disk (c0t1d0) using the fmthard command as follows:

    # prtvtoc /dev/rdsk/c0t0d0s2 | fmthard –s - /dev/rdsk/c0t1d0s2<cr>

    Windows To Go: How to Install and Run Windows 10 from a USB Drive | killexams.com real questions and Pass4sure dumps

    Did you know that a full copy of Windows can be installed and run from a USB drive? Microsoft introduced "Windows To Go" with Windows 8 Enterprise and has continued supporting the feature in Windows 10, which can be kept on a pen drive in your pocket as a portable operating system.

    This feature is intended as a convenient way for workers to carry their corporate environments with them, but having your own copy of Windows on a thumb drive could be handy for backup purposes, too, or if you frequently use public machines that lack your preferences/applications or that have a restricted OS.

    For a long time this was a neat thing you could do with many Linux distros (we plan to cover Linux Live on a separate article soon), but barring driver complications and hardware limitations, a Windows To Go drive should boot from "most" computers.

    Booting a Windows 10 "To Go" drive on a modern machine that shipped with Windows 10 is likely to work fine, and because performance if often of the essence, a USB 3.0 port is always desirable. Older systems that originally sold with Vista or XP may work, too, but will have reduced processing power and slower USB ports, meaning they might not meet the minimum hardware requirements, listed below:

  • The ability to boot from a USB drive
  • USB 2.0 ports or better
  • A 1GHz+ processor
  • 2GB of RAM, and...
  • DirectX 9 with WDDM 1.2 or greater
  • Microsoft's To Go documents note that a process called "respecialize" identifies and loads drivers for a specific machine during the first boot-up, along with disabling drivers that aren't required. This profile is remembered and automatically selected on subsequent boot-ups. "In general this feature is reliable and efficient when roaming between PCs of widely varying hardware configurations," the company says, and that's a "generally fair" statement based on our observations from testing.

    On the upper side of performance, running Windows 10 To Go from a 32GB USB 3.1 flash drive was quite usable for general computing/basic productivity on an old desktop and a modern laptop. However, we also experienced various complications when creating and booting different versions of Windows To Go...

    Hardware and software configurations tested

    Before we get to creating a Windows To Go drive, here's an overview of the testing that was performed using a variety of hardware and software combinations as well as some recommendations and considerations about configuring a portable Windows drive.

    Systems used for testing

  • An old Core i5 Lynnfield-based enthusiast desktop PC with USB 2.1 ports
  • A new Dell XP3 13 9370 laptop with USB-C ports & USB 3.1 adapter
  • As a side note, the desktop also has a USB 3.1 PCIe adapter card, but the motherboard's BIOS can't see or boot from drives attached to this device. This is typical for USB expansion cards and worth mentioning in the event that you attempt to boot from one. Here is more information on how to boot from a USB drive if the subject is unfamiliar to you.

    USB drives tested

    None of these are officially "certified" for Windows To Go. Besides being fast enough to run an operating system, certified USB drives are designed to appear as fixed instead of removable devices when plugged into Windows. Both types of drives can technically be used for Windows To Go, but only fixed ones will work with the creation tool built into Windows 10 Pro and Enterprise.

    We'll elaborate on this later, but note that despite not being an official Windows To Go drive, the Corsair Flash Voyager GTX does appear to Windows as a fixed drive, it certainly meets the speed requirements, and is considerably cheaper than ~$200 "certified" options such as the Kingston Data Traveler Workspace, Kanguru Mobile Workspace and Super Talent Express RC4.

    The ancient Patriot drive was included out of curiosity and its performance was as poor as you'd expect. Running Windows 10 on the 16GB USB 2.0 drive wasn't what we'd deem usable and no greater success was had with Windows 7 or 8. Sometimes the initial setup process for Windows 10 would BSOD or fail some other way, and when the process did complete, the performance was slow to say the least, taking upwards of 30 seconds to open a menu for instance -- if it would open at all. This configuration might only be useful for a recovery environment if you had no other option, though a lightweight Linux distro might make more sense on such a slow drive.

    Conversely, the faster 200MB/s reads on Samsung's drive proved to be very usable for general computing/basic productivity on a Windows 10 To Go drive, excluding the occasional spot of lag. We purchased this drive at the recommendation of a reader. Again, this model technically isn't certified for Windows To Go and has relatively slow ~30MB/s write performance, which might matter depending on your use case. For reference, the write speed on a conventional hard drive is around 70MB/s.

    Considering the fact that Samsung's drive only costs about $10, it's a great budget solution if you want to create a Windows To Go drive for basic use, although be aware that you'll have to use third party tools instead of the one built into Windows 10 -- we cover both in this article.

    From what we've seen, USB drives that are certified for WTG tend to have read performance starting around the same speed as Samsung's drive along with equally fast write speeds (~200MB/s). However, as mentioned before, this level of performance is available for considerably less money on "non-certified" USB drives, which can still be used for Windows To Go via third party tools. Microsoft's official utility has other limitations as well and we imagine most of you will wind up using third-party tools.

    Here are some additional non-certified drives that we recommend based on their price and advertised speed (the first two are removable and not fixed, the third should be fixed):

  • $29 64GB Kingston DataTraveler Elite G2 - up to 180MB/s reads and 70MB/s writes
  • $52 128GB SanDisk Extreme Pro - up to 420MB/s reads and 380MB/s writes
  • $198 1TB Samsung T5 Portable SSD - advertises up to 540MB/s reads and writes
  • Compared to the Samsung drive already discussed, the Kingston unit trades a few MB/s on reads for a few MB/s on writes, which should be better balanced performance-wise, at least on paper anyway.

    Like the Flash Voyager GTX we tested, the SanDisk Extreme Pro should eliminate any questions or concerns about the capacity and speed of your Windows To Go drive. These models are around the same cost per gig (prices change a lot) but again, the Corsair drive appears to Windows as fixed and not removable, which is ideal for a Windows To Go drive.

    The best value WTG-certified drive we found was the 64GB Kingston DataTraveler Micro Duo USB 3 Type-C (not USB Type-A) for $21, though this drive's 100MB/s reads and 15MB/s writes are slower than the non-certified Kingston drive listed above for $29.

    Lastly, if you were thinking about spending $200 on a faster certified Windows To Go drive, the Samsung T5 Portable SSD has 1TB of storage for the same price instead of only 64-128GB, is only a little larger than a thumbdrive, touts read/write rates of up to 540MB/s and should appear to Windows as a fixed device.

    Windows versions tested as portable

    Although the 32-bit version of Windows 10 (build 1803) occupied around 3GB less than the 64-bit version, 64-bit managed to load Wi-Fi and touchpad drivers for our XPS 13 while 32-bit didn't. If we had to guess, you are more likely to encounter 64-bit-capable machines than 32-bit-exclusive machines at this point. There may be more 32-bit systems in existence overall, but most of them are also outdated.

    We don't suggest using Windows 7 or Windows 8 To Go unless you're sure they'll boot on the systems you'll be using. Both generations BSOD'd during the initial setup on the XPS 13 9370 and even failed to load on our enthusiast PC from that era. Third-party Windows To Go creation tools also tended to fail more frequently when using Windows 7 and 8 images, which are less supported in general.

    Windows 10 64-bit should have the best driver compatibility on the machines that you are most likely to use, especially if they are on the newer side.

    Running Windows 10 64-bit from the ~$10 Samsung drive plugged into a USB 3.1 port was particularly usable. Booting the same configuration from USB 2.0 often saw a second or two of unexpected lag when opening menus or applications -- performance that we'd describe as "usable enough" if necessary for creating documents, browsing the web and so on.

    Meanwhile, running Windows 10 on the Corsair Voyager was essentially indistinguishable from using Windows on any other SSD thanks to the drive's advertised 440MB/s read & write performance.

    Creating a Windows To Go USB drive

    Windows' built-in tool for making Windows To Go drives is currently supported on Windows 10 Pro, Enterprise and Education builds. And while the creation tool is available on Pro, it still requires an Enterprise image file to create the Windows To Go drive -- among other limitations.

    Fortunately, there are several ways to get an Enterprise image. Microsoft offers a direct download of Windows 10 Enterprise ISO for evaluation after you fill out a form, and you can download an Enterprise install.esd file directly from them as well.

    You'll also have to extract the install.wim file that's inside a Windows 10 Enterprise ISO (in the Sources folder) or convert install.esd to .wim because the built-in Windows To Go tool only recognizes .wim files, not ISOs or other formats.

    Install.wim and .esd are image files with system data that can be used for a Windows installation. You can convert .esd to/from .wim using DISM++, a third-party graphical user interface for Microsoft's DISM (Deployment Image Servicing and Management), which you can also use directly from the Command Prompt.

    Even if you have an Enterprise image however, the native Windows To Go utility won't work with most USB drives, including two out of three of the ones we used for testing. As we've been saying, the built-in tool only works with select USB drives that appear to Windows as "fixed" and not "removable." This is a hardware attribute of the drives.

    Historically, the main difference here is that Windows can't mount multiple partitions at once on removable drives (only the first primary partition is mounted), yet Windows installation drives tend to have at least two partitions: one with boot info, another with the operating system. However, as of the Windows 10 Creators Update, the operating system can mount multiple partitions on removable USB drives, and in testing we were also able to create a bootable Windows To Go drive with only one partition.

    Regardless, although the 32GB Samsung drive is recognized by the built-in Windows To Go tool, the software explains that the device is removable and thus not compatible.

    While the Corsair Voyager isn't certified for WTG either, this drive is fixed instead of removable and does work with native utility, though the software recognizes that the device technically isn't certified. Again, most USB sticks are configured as removable, certified Windows To Go drives are set as fixed, while some non-certified USB drives are also configured as fixed and cost much less than WTG branded drives -- as is the case with our recommended Corsair Voyager XT.

    You can determine if a drive is fixed or removable from Disk Management (search Start or Run for diskmgmt.msc). Look at the squares toward the bottom left where the drive descriptions say "Basic" or "Removable."

    You can also check by entering these two commands into Command Prompt:

    wmiclogicaldisk get caption,drivetype

    The output should be a list of drives with numbers next to them: 0 = Unknown, 1 = No Root Directory, 2 = Removable Disk, 3 = Local Disk, 4 = Network Drive, 5 = Compact Disk, 6 = RAM Disk

    If you have a fixed USB drive and an install.wim file extracted from an Enterprise ISO, the built-in Windows To Go tool should work largely as you'd expect: you choose a drive, choose an image and wait for the process to complete.

    Making a removable drive appear as fixed

    With some effort and risk, there are several methods you can try to make your removable drive appear as fixed, though there's not much reason to mess with this setting when third-party Windows To Go tools will work with non-fixed drives.

    We aren't recommending these approaches but acknowledge there are various methods around the web that can either flip the removable media bit on your flash drive or install a filter driver on Windows so the OS determines the drive as fixed. Proceed at your own risk, namely a bricked USB drive or blue screening Windows, the latter of which we experienced when testing filter drivers and had to restore from a recovery image.

    Third-party Windows To Go creation tools

    Rufus is probably the most popular tool that can create a Windows To Go drive for Windows 8 and 10, though it may not be so obvious at first glance. Here's a quick guide on the Windows To Go creation process from Rufus 3.3.1. This worked for both the removable and fixed USB drives that we used for testing:

  • Select a drive and ISO like you were creating a bootable OS drive any other time
  • Click the dropdown menu and choose Windows To Go instead of standard installation
  • Choose your desired boot sector info (using MBR + UEFI throughout testing was fine)
  • Windows 8, 8.1 and 10 are supported (not Windows 7). However, Rufus 3.3.1 doesn't list the Windows To Go option when using a Windows 10 1809 ISO while an 1803 ISO works fine.

    The software might also send a warning if you aren't using a fixed drive, though the resulting portable OS drive still works and in fact Rufus provided the best overall performance of all the Windows To Go creation tools we tested, generally having less errors/failures.

    "You are trying to install Windows To Go, but your target drive doesn't have the fixed attribute. Because of this Windows will most likely freeze during boot, as Microsoft hasn't designed it to work with drives that instead have the removable attribute. Do you still want to proceed? Note: The fixed/removable attribute is a hardware property that can only be changed using custom tools from the drive manufacturer. However those tools are almost never provided to the public."

    While Rufus is the most commonly available third-party tool we can recommend for creating an "unofficial" Windows To Go drive, the software lacks some features that others provide, such as the ability to export your currently running operating system onto a portable USB drive, though this is generally locked behind a paid license.

    Here are many other tools that can make a portable Windows drive:

  • WinToUSB - This tool is dedicated to creating Windows To Go drives and has already received an update to work with the latest build of Windows 10 (1809).
  • Getting started: Select a Windows image file (.iso, .wim, .esd, .swm) and continue with the prompts. The MBR + UEFI boot configuration requires a $30 upgrade, as does the ability to export your current OS (tools > Windows To Go Conversion).
  • Aomei Partition Assistant - Along with being able to create Windows To Go drives from image files (.iso, .wim and .esd), this software includes a full drive partitioning suite in the same 11MB package -- convenient given the task at hand.
  • Getting started: Click the "Windows To Go Creator" on the left and follow the prompts. The option to export your current OS is also in this wizard, but only the paid Professional edition (~$50) has this feature enabled.
  • FlashBoot - Has a variety of features for USB drives, including the ability to create one that will boot independently from your primary operating system. Again though, only the Pro version ($30) can clone your current OS as a Windows To Go drive.
  • Getting started: Click Full OS > USB, select whether to prepare the drive for UEFI or MBR-based systems and then you can choose a .iso or .esd file. The software can also use the .esd file on your current installation (C:\ESD\Windows\Sources\install.esd) without downloading any additional OS data.
  • Note: Perhaps all of the third-party tools do this, but FlashBoot's website mentions that by using registry/driver tweaks the software "will make removable USB thumb drives always appear as fixed to Windows To Go."

    Creation methods that are more hands-on

    Before there were so many third-party tools to build a Windows To Go drive, the commonly recommended approach was to:

  • Prepare the USB drive yourself from DiskPart in a Command Prompt.
  • Use a tool to extract/install the install.wim or .esd file from a Windows ISO.
  • Create boot entries on the USB drive, again using the Command Prompt.
  • Useful downloads for manual creation: DISM++ | GImageX

    Preparing the USB drive for Windows To Go from Disk Management or DiskPart is simple: Delete the previous volume(s), create a new volume, format that volume, give the partition a letter and then make that partition active.

    At this point, the USB drive should be ready for you to install the operating system files from one of the aforementioned archive files.

    Install.wim and install.esd contain compressed OS data that can be used to create a Windows installation or a To Go drive. Your Windows ISO will have one or the other -- you only need one of them and you can convert .wim or .esd files back and forth with DISM++ (GImageX requires a .wim file).

    GImageX can apply the install.wim to a USB drive and this software is part of Microsoft's Windows Automated Installation Kit, though the full toolkit is more than 1GB to download whereas GImageX itself is only around 350KB (not MB).

    Quick instructions for GImageX: Go to the Apply tab > choose a source install.wim file and the destination USB drive > click Apply.

    After copying the system files, you'll also have to create the boot data via Command Prompt using the OS files that you just copied to the portable drive.

    Enter the following line from an admin Command Prompt, where G: is your USB drive (this should only have one partition if you followed our steps, but if there is a separate partition for boot files then use that drive letter in place of the second G:).

    bcdboot.exe G:\Windows /s G: /f ALL

    If those methods aren't hands-on enough, Microsoft provides step-by-step instructions for creating a Windows To Go drive entirely from PowerShell commands, while this guide includes a customizable PowerShell script to automate some of the process along with extra features such as the ability to inject drivers and patches.

    Export your current OS to a USB drive

    This process is automated by many third-party Windows To Go creation tools, but the feature typically costs money. Not wanting to pay for premium licenses, we tested various ways to manually export our current OS from an SSD to a USB drive using a few free utilities and the Disk Management software already on Windows (diskmgmt.msc via Start or Run).

    Useful downloads for a manual export: Disk2VHD | HDD Raw Copy Tool

    Here's an overview of the process we used to clone our actively running copy of Windows 10 Pro to a thumbdrive:

  • Use Disk2VHD to create a VHD (virtual hard disk) image file of your OS drive. This is a full copy of the drive in one file so you'll need enough storage for that.
  • Mount that VHD file with a drive letter in Windows: Either right-click the file and choose Mount or open Disk Management and go to Action > Attach VHD.
  • With the VHD mounted, HDD Raw Copy Tool can clone the virtual drive to a physical drive (whether fixed or removable, including regular USB drives).
  • The USB drive might boot after cloning the VHD, though several times during testing we had to reapply boot information to the drive from an admin Command Prompt. You'll also want Disk Management open to see how many partitions are on the drive and what letters are assigned to them.

    Entering the following line into an elevated Command Prompt will apply the boot information (I:\Windows is where the boot data is being copied from while H: is where the data is being copied to).

    You'll want to apply the boot data to/from the Windows partition(s) that have been cloned to your USB drive, not C:\Windows. If there are two partitions on your USB drive, apply the boot files to the smaller one, while if there is only a single partition then you can apply the boot data there.

     bcdboot.exe I:\Windows /s H: /f ALL

    Using "/f ALL" with that command includes files for both UEFI/MBR BIOS.

    Throughout testing, we also successfully made Windows To Go drives by manually creating a 500MB partition for boot files on the USB drive along with an OS partition via Disk Management.

    Then we mounted the VHD as described but used File Explorer to copy all the files in the VHD to the USB drive's OS partition (this was much slower than cloning with HDD Raw Copy Tool and didn't work as reliably -- you can apply the boot data to the first partition via the method mentioned above).

    Note that the free version of WinToUSB automates the creation of a Windows To Go drive using VHD files (VHDX requires a license) and the resulting drive boots directly from the VHD file.

    However, our Windows To Go drive loaded to a blue screen error that read "VHD Boot Host Volume Not Enough Space" and required a registry modification to the system inside the virtual hard drive, making as much or more work out of the WTG creation process than our manual method above.

    If you are going this route, you might as well change the registry setting on your system before creating the VHD so you don't have to load the registry hive separately afterward. You want to change the following registry key so the DWORD value is 4 instead of 1 to prevent the virtual disk from expanding when mounted.

    With this setting applied, the VHD-based drive created by WinToUSB finally booted:

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\FsDepends\Parameters] "VirtualDiskExpandOnMount"=dword:4

    We also noticed that DISM++ can create a .wim file of your currently running copy of Windows with the "System Backup" option, and this could presumably be applied to a USB drive, though we didn't follow through on this method because the operation was taking considerably longer to complete than creating a VHD and cloning that.

    Additionally, note that Rufus can copy VHD files to USB drives, though you might have to configure the boot data beyond the command mentioned above (links at the end of the article should get you started).

    Also, Disk Management can create an empty VHD file (Action > Create VHD) where you can apply an install.wim file along with boot data, at which point you can clone this virtual drive to a USB drive as a Windows To Go workspace.

    Best practices and configuration tips

    From the user's perspective, the first time Windows To Go is booted it performs some initial configuration before presenting the familiar setup process that you go through on any fresh Windows installation (creating a user account essentially). After that, the operating system loads up as if it were installed on any other drive.

    For the most part, this is a full Windows installation, though there are a few differences in configuration and usage practices.

    Disabled functionality on Windows To Go:
  • Internal disks are offline. This prevents data from being exchanged between the Windows To Go drive and those in the host machine. These drives can be enabled but it's not recommended because if the host machine is hibernating, you'll delete that user state and any unsaved data along with it. This may also corrupt the host PC's operating system.
  • Hibernate is disabled by default. Hibernation can be re-enabled on the WTG drive, though there isn't much sense in hibernating on one machine/configuration and then attempting to reload that session on another system. Hibernation also occupies a significant amount of storage.
  • Trusted Platform Module (TPM) isn't used. When using BitLocker Drive Encryption, a pre-operating system boot password will be used for security instead of TPM, which is bound to a specific computer and Windows To Go drives will move between computers.
  • Windows Recovery Environment is excluded. Microsoft says you should re-image the Windows To Go drive instead. Likewise, refreshing/resetting is disabled (resetting to an OEM's standard doesn't apply for Windows To Go).
  • Upgrading a Windows To Go workspace also isn't supported. Older Windows 8 or Windows 8.1 Windows To Go workspaces can't be upgraded to Windows 10 workspaces, nor can Windows 10 WTG be upgraded to future versions of Windows 10. For new versions, the drive needs to be re-imaged with a fresh copy of Windows. We did not test the software, but Hasleo (the WinToUSB developer) has a Windows To Go Upgrader.
  • Best practice suggestions for using Windows To Go:
  • Always shut down Windows and wait for shutdown to complete before removing the Windows To Go drive.
  • Don't insert the Windows To Go drive into a running computer.
  • Don't boot the Windows To Go drive from a USB hub. Because of power requirements, always insert the Windows To Go drive directly into a port on the computer.
  • If available, use a USB 3.0/3.1 port with Windows To Go.
  • Do not install non-Microsoft core USB drivers on Windows To Go.
  • Suspend BitLocker on Windows 7 host computers before changing the BIOS settings to boot from USB and then resume BitLocker protection.
  • If you unplug the drive while Windows To Go is running, Windows will freeze and you have 60 seconds to plug the drive back in. After 60 seconds, the computer will shut down and your session will be lost.
  • After removing the drive without shutting down properly, it's suggested that you not plug the WTG drive into another system for risk of corrupting critical system files.
  • Closing remarks & configurations

    Ideally, network drivers will be automatically loaded when you first boot into Windows To Go, at which point any other drivers can be downloaded from Windows Update or elsewhere.

    After installing a few applications on a fresh WTG drive we started receiving notifications from Windows about the 32GB Samsung drive running low on space, though there was still around 10GB free. Considering hibernation and system restore are already disabled by default, there aren't many options for saving space on a stock Windows To Go install.

    If storage capacity is a concern, you may want to create your drive with the Enterprise LTSC build of Windows 10, which excludes bloat such as Cortana, the Windows Store and virtually every other pre-installed application -- including Microsoft Edge (we installed Iridium).

    We reclaimed an additional 2.55GB of space on a fresh Enterprise LTSC install by compressing the operating system with the following line from an administrator Command Prompt:

    Compact.exe /CompactOS:always

    While the LTSC build of Windows 10 is already pretty barebones, more built-in applications, drivers, updates and other operating system components can be added or removed to an installation image by loading the install.wim or .esd into NTLite, which can be used to create a Windows 10 ISO as lean as 700MB. If you're going this route, here's another detailed guide on configuring Windows 10 components.

    Getting started in NTLite: Add a .wim or .esd file. Right click that file when it appears in the software and choose "load." When the loading process completes, you should see options on the left column.

    Depending on the speed of your drive and host system, you might also want to disable animations for menus and windows, which can improve performance on lower-end machines and Windows is visually snappier without these settings enabled.

    How to find these performance settings:

  • From the Control Panel: System > Adjust the appearance and performance of Windows > Visual Effects tab...
  • From This PC: Right click This PC > Properties > Advanced system settings > Advanced tab > Performance Settings...
  • The gif above demonstrates the speed difference of opening and closing OpenShell with and without one of these performance animation settings enabled ("Fade or slide menus into view").

    After you've configured your Windows To Go installation, you might want to make a backup image of the drive so the operating system can be reapplied with your customizations (hint: Rufus can create an image with the save icon next to your USB drive).

    Some parting commands and other useful resources:
  • SFC /scannow | Performs an integrity check and replaces corrupt system files.
  • DISM /Online /Cleanup-Image /RestoreHealth | Runs a similar system repair scan.
  • C:\Windows\System32\sysprep\sysprep.exe /oobe /generalize /shutdown | Removes PC-specific information such as installed drivers, shuts down and reruns the initial setup process on the next boot-up.
  • slmgr.vbs -rearm | Rearms the Windows trial period and lets you access all the features on a non-activated copy of Windows -- useful if not cloning your activated OS.
  • Easy2Boot | Software that can apply a boot menu to your USB drive which among other features can directly boot from many of the image file types mentioned in this article (.iso, .wim, .vhd).
  • HeiDoc.net Windows Download Tool | Provides an interface for downloading original Windows ISOs directly from Microsoft's servers, including Windows 7/8.1, Insider Preview/Developer/Enterprise builds and old versions of Windows 10.
  • Here are Microsoft's own guides on building a Windows To Go drive, native booting from VHDs on a USB drive, as well as editing Windows boot files with BCDBoot and operating DISM via Command Prompt.
  • More Useful Tips

    Flashback botnet: The end of the Mac’s malware immunity? | killexams.com real questions and Pass4sure dumps

    mac-flashback-virus

    For the better part of two decades, Mac users have believed themselves largely immune to the trojans, worms, and malware that plague the Windows world. However, Macs have never been fundamentally more secure than any other computer, and now the community’s collective complacency may finally be put to the test.

    Computer security firm Dr. Web reports that a recent variant on the Flashback malware has successfully exploited a previously unpatched Java vulnerability to infect as many as 600,000 Mac computers around the world. Although other security firms aren’t publishing estimates of infection rates, companies like Sophos, Intego, and F-Secure back up the alarm cry: the Flashback variant is real, and in some cases it can install itself without any user intervention when a user visits a specially crafted Web page. It’s the sort of doomsday scenario Mac users have never really seen before: malware that can infect a Mac just by loading a Web page.

    Dr Web Flashback mac botnet infection map April 4 2012

    However, it’s not (currently) the end of the world. Not all Macs are vulnerable, a patch is available, and there are simple things users can do to protect themselves and determine if they’re already infected. But if you’re a Mac user, the current Flashback scare merits a few minutes of your attention, at the very least.

    Am I Infected?

    Users of Intel-based Macs are potentially vulnerable to the Flashback malware. The malware is sophisticated, however, so determining whether a Mac is infected is a tad complicated.

    First, launch the Terminal application (in /Applications/Utilities, or just do a Spotlight search for “Terminal” and launch it from there). You’ll see a window with a Unix command line prompt. (It’s OK, it won’t bite.) Copy and paste the following command at the prompt, then press Return.

    defaults read /Applications/Safari.app/Contents/Info LSEnvironment

    If you see a two-line response and the second line is “The domain/default pair of (/Applications/Safari.app/Contents/Info, LSEnvironment) does not exist,” then copy and paste the following command at the prompt and press Return:

    defaults read ~/.MacOSX/environment DYLD_INSERT_LIBRARIES

    Again, you want to see a two-line response. If the second line ends with “does not exist,” your Mac is not infected. Type “exit” at the prompt and quit the Terminal application.

    If you see responses from either of these commands that indicate data was found, your Mac may be infected, and you’ll want to take steps to remove malware from your system. For the technically proficient (it involves more Terminal commands), F-Secure has posted a set of manual removal instructions. Less technically-inclined may wish to download a free removal tool from Sophos or ClamXav or get someone else to perform the removal. Some of the steps below on how to protect your Mac may also help.

    How does this version of Flashback work?

    Flashback installer (faking Adobe Flash, not Java)Flashback isn’t new: it’s a whole family of malware variants that first appeared back in September 2011. However, the initial versions of the malware appeared as bogus Adobe Flash Player installers. When users loaded a Web page bearing the malware, they’d see something that looked like a Flash error. Clicking it would bring up a prompt to install something that looked like Adobe Flash. (That’s how they name “FlashBack” got attached.) Infection depended on tricking people into downloading, accepting an self-signed certificate purporting to be from Apple, and installing the malware. Trojans that rely on social engineering aren’t anywhere near as common on the Mac as on Windows, but FlashBack wasn’t exactly new under the sun. Unfortunately, Flashback was Mac-savvy: once installed, early versions tried to kill off Apple’s barebones XProtect anti-malware protection system present in Snow Leopard and Lion.

    Then, around late February of this year, FlashBack shifted to a new trick, leveraging two vulnerabilities in Java to attempt to install itself without any user intervention at all. Although the threat no longer poses as Adobe Flash, the malware under the hood appears to be the same — and that’s why it’s kept the FlashBack name. The malware installation will prompt for an administrator password, but it doesn’t actually need administrator authorization to infect a Mac — the malware uses a two-pronged approach. The one with the admin password is a bit cleaner; the one without is brute force.

    Once on a user’s Mac, if a user gives their admin password, the software checks to see if particular apps (like Apple’s XCode development environment and common antivirus and security tools) are installed; if so, it deletes itself, presumably to avoid detection. Otherwise, the infection connects out to command-and-control servers to download the malware payload: this is the actual FlashBack engine, and the malware operators can change or update it at any time. Current versions of the malware seem focused on collecting passwords for services like Google, PayPal, and banking sites, presumably to get credentials that can be used by cybercriminals to take over email and online accounts or drain bank accounts.

    If a user does not give their administrator password, the infection loader tries to insert itself into essentially any app a user might run (with exceptions for Microsoft Word, Office 2008/2011, and Skype, which are apparently incompatible). Once the infection is installed and a user runs an app, it will attempt to connect to the command-and-control servers and download the payload. This infection method is effective, but very crude and likely not compatible with all apps: users might easily notice that some programs start crashing or behaving unpredictably.

    Didn’t Apple ditch Java?

    Apple Java iconApple shipped Java for Intel-based Macs as part of Mac OS 10.4 (Tiger), 10.5 (Leopard), and 10.6 (Snow Leopard); however, Apple deprecated Java as of Mac OS X 10.6.3, and stopped including Java at all with Mac OS 10.7 (Lion). Lion users will only have Java if they upgraded from a previous system to Mac OS X 10.7, or if they explicitly downloaded and installed Java themselves. If Lion users try to run a Java app, Mac OS X will ask if users want to download and install Java from Apple.

    Apple’s Java situation is a little peculiar. Apple originally wanted Mac OS X to be a top-tier Java development and runtime platform. The company intrepidly developed its own Java runtime for Mac OS X and had it certified by Sun, Java’s creator. But that pattern meant Apple’s Java always lagged substantially behind official Java releases, and that lag increased substantially when Oracle acquired Sun in 2009. A year later, Apple basically said it wasn’t going to keep updating Java, and removed it from Mac OS X’s default installation. This put Java into limbo on the Mac.

    Oracle patched the key Java vulnerability exploited by Flashback on February 14. Apple, on the other hand, only released an updated version of Java with that patch (and eleven other Java security fixes) on April 3 — a lag of six weeks.

    The vulnerability isn’t Mac-exclusive: the same Java hole can be used to attack Linux and Windows systems. Mozilla Firefox took the unusual step of blocking older versions of Java in Windows versions of its Web browser to protect users.

    So how can I protect my Mac?

    Here are the simplest ways to protect your Mac from the current Flashback malware threat:

    If you have Java, update it

    Apple has released an updated version of Java that patches the vulnerability exploited by Flashback. If you’re running Mac OS X 10.6 (Snow Leopard) or 10.7 (Lion) and you have Java installed, the update should appear automatically when you run Software Update (Apple menu > Software Update), or you can get it yourself from Apple’s support downloads site (for Snow Leopard or Lion)

    If you have an Intel-based Mac and you’re running Mac OX 10.5 or earlier, you can see if you have Java installed using the Terminal. Launch Terminal (in /Applications/Utilities/) and paste in the following command:

    java -version

    If you see the message “No Java runtime support, requesting install,” you do not have Java installed. If you see a version number less than 1.6.0_31 (and you will, if you have any Java at all), your system is potentially vulnerable. Apple won’t be releasing a patched version of Java for Mac OS X 10.5 or earlier. Use the other steps below to protect yourself.

    Disable Java in Web browsers Java never really took off as a mainstream platform for Web content, so most users don’t need to enable Java in their Web browsers. Disabling Java will block Flashback’s “drive-by” attack, and is the most effective way for earlier users of Mac OS X to protect themselves.
  • Safari—Go to Preferences > Security, and uncheck “Enable Java.” (While you’re in there, go to Preferences > General and make sure “Open ‘Safe’ files after downloading” is unchecked.)
  • Firefox—Choose Tools > Add-ons, select the Plug-ins Tab, and click the “Disable” button next to Java Plug-in.
  • Chrome — Type chrome://plugins in Chrome’s address bar. A list of available plug-ins will appear. Find Java and click the “Disable” link beneath it.
  • This doesn’t remove Java from your system, it just prevents Web browsers from launching or running Java apps. That’s enough to protect you from the drive-by nature of the Flashback attack. You’ll still be able to run desktop applications that require Java — a common example is things like Citrix’s GoToMeeting — but you may find you need to selectively re-enable Java in a browser to log in to services or download updates. In that case, you can selectively re-enable Java to get an app running, then disable it again when you’re done.

    Consider antivirus software If you’re in a situation where you can’t update Java or can’t disable a vulnerable version of Java, you should consider antivirus software to protect your Mac. ClamXav makes a free antivirus package for Mac users; similarly, Sophos has a Mac antivirus package free for non-commercial use. Commercial antivirus packages are also available for Mac OS X from the likes of Intego and Symantec; F-Secure also has a beta Mac OS X security product. Does your Mac need antivirus software?

    virus attackThe days of the Mac’s immunity from malware appear to be at an end: last year saw the MacDefender scare (and Apple’s brief tit-for-tat battle with its perpetrators), and now there’s a genuine drive-by infection threat to the Mac — even though it doesn’t rely on technology exclusive to Mac OS X. Although the malware situation on Mac OS X is still several orders of magnitude less severe that that for Windows, the writing is on the wall: as the Mac platform gains adherents, it’s going to start attracting sophisticated malware authors.

    What about GateKeeper, the new protection technology that’s due to arrive with Mac OS X 10.8 Mountain Lion? Mac user shouldn’t rely on GateKeeper to protect them: the technology will enable users to decide they only want to run applications that come from Apple and/or the Mac App store, and developers who have identified themselves to Apple, or (like now) run any application from any source. GateKeeper will not protect Mac users from vulnerabilities in applications or system components — which means a problem with a Web browser plug-in or a low-level component like Java is out of GateKeeper’s purview — and Mountain Lion users would be just as vulnerable to something like Flashback’s drive-by attack as anyone else.

    For the time being, it’s probably too early to recommend all Mac OS X users install and run antivirus software: the best case for running AV software on a Mac is still to clean Windows-based viruses and malware out of files and documents Mac users might be passing along to hapless Windows users. But the day may come — soon — when the Mac malware universe warrants widespread use of high-quality antivirus software.

    Lead image on Mac screen via Sebastian Kaulitzki/Shutterstock



    Direct Download of over 5500 Certification Exams

    3COM [8 Certification Exam(s) ]
    AccessData [1 Certification Exam(s) ]
    ACFE [1 Certification Exam(s) ]
    ACI [3 Certification Exam(s) ]
    Acme-Packet [1 Certification Exam(s) ]
    ACSM [4 Certification Exam(s) ]
    ACT [1 Certification Exam(s) ]
    Admission-Tests [13 Certification Exam(s) ]
    ADOBE [93 Certification Exam(s) ]
    AFP [1 Certification Exam(s) ]
    AICPA [2 Certification Exam(s) ]
    AIIM [1 Certification Exam(s) ]
    Alcatel-Lucent [13 Certification Exam(s) ]
    Alfresco [1 Certification Exam(s) ]
    Altiris [3 Certification Exam(s) ]
    Amazon [2 Certification Exam(s) ]
    American-College [2 Certification Exam(s) ]
    Android [4 Certification Exam(s) ]
    APA [1 Certification Exam(s) ]
    APC [2 Certification Exam(s) ]
    APICS [2 Certification Exam(s) ]
    Apple [69 Certification Exam(s) ]
    AppSense [1 Certification Exam(s) ]
    APTUSC [1 Certification Exam(s) ]
    Arizona-Education [1 Certification Exam(s) ]
    ARM [1 Certification Exam(s) ]
    Aruba [8 Certification Exam(s) ]
    ASIS [2 Certification Exam(s) ]
    ASQ [3 Certification Exam(s) ]
    ASTQB [8 Certification Exam(s) ]
    Autodesk [2 Certification Exam(s) ]
    Avaya [101 Certification Exam(s) ]
    AXELOS [1 Certification Exam(s) ]
    Axis [1 Certification Exam(s) ]
    Banking [1 Certification Exam(s) ]
    BEA [5 Certification Exam(s) ]
    BICSI [2 Certification Exam(s) ]
    BlackBerry [17 Certification Exam(s) ]
    BlueCoat [2 Certification Exam(s) ]
    Brocade [4 Certification Exam(s) ]
    Business-Objects [11 Certification Exam(s) ]
    Business-Tests [4 Certification Exam(s) ]
    CA-Technologies [20 Certification Exam(s) ]
    Certification-Board [10 Certification Exam(s) ]
    Certiport [3 Certification Exam(s) ]
    CheckPoint [43 Certification Exam(s) ]
    CIDQ [1 Certification Exam(s) ]
    CIPS [4 Certification Exam(s) ]
    Cisco [318 Certification Exam(s) ]
    Citrix [48 Certification Exam(s) ]
    CIW [18 Certification Exam(s) ]
    Cloudera [10 Certification Exam(s) ]
    Cognos [19 Certification Exam(s) ]
    College-Board [2 Certification Exam(s) ]
    CompTIA [76 Certification Exam(s) ]
    ComputerAssociates [6 Certification Exam(s) ]
    Consultant [2 Certification Exam(s) ]
    Counselor [4 Certification Exam(s) ]
    CPP-Institute [4 Certification Exam(s) ]
    CSP [1 Certification Exam(s) ]
    CWNA [1 Certification Exam(s) ]
    CWNP [13 Certification Exam(s) ]
    CyberArk [1 Certification Exam(s) ]
    Dassault [2 Certification Exam(s) ]
    DELL [11 Certification Exam(s) ]
    DMI [1 Certification Exam(s) ]
    DRI [1 Certification Exam(s) ]
    ECCouncil [22 Certification Exam(s) ]
    ECDL [1 Certification Exam(s) ]
    EMC [128 Certification Exam(s) ]
    Enterasys [13 Certification Exam(s) ]
    Ericsson [5 Certification Exam(s) ]
    ESPA [1 Certification Exam(s) ]
    Esri [2 Certification Exam(s) ]
    ExamExpress [15 Certification Exam(s) ]
    Exin [40 Certification Exam(s) ]
    ExtremeNetworks [3 Certification Exam(s) ]
    F5-Networks [20 Certification Exam(s) ]
    FCTC [2 Certification Exam(s) ]
    Filemaker [9 Certification Exam(s) ]
    Financial [36 Certification Exam(s) ]
    Food [4 Certification Exam(s) ]
    Fortinet [14 Certification Exam(s) ]
    Foundry [6 Certification Exam(s) ]
    FSMTB [1 Certification Exam(s) ]
    Fujitsu [2 Certification Exam(s) ]
    GAQM [9 Certification Exam(s) ]
    Genesys [4 Certification Exam(s) ]
    GIAC [15 Certification Exam(s) ]
    Google [4 Certification Exam(s) ]
    GuidanceSoftware [2 Certification Exam(s) ]
    H3C [1 Certification Exam(s) ]
    HDI [9 Certification Exam(s) ]
    Healthcare [3 Certification Exam(s) ]
    HIPAA [2 Certification Exam(s) ]
    Hitachi [30 Certification Exam(s) ]
    Hortonworks [4 Certification Exam(s) ]
    Hospitality [2 Certification Exam(s) ]
    HP [752 Certification Exam(s) ]
    HR [4 Certification Exam(s) ]
    HRCI [1 Certification Exam(s) ]
    Huawei [21 Certification Exam(s) ]
    Hyperion [10 Certification Exam(s) ]
    IAAP [1 Certification Exam(s) ]
    IAHCSMM [1 Certification Exam(s) ]
    IBM [1533 Certification Exam(s) ]
    IBQH [1 Certification Exam(s) ]
    ICAI [1 Certification Exam(s) ]
    ICDL [6 Certification Exam(s) ]
    IEEE [1 Certification Exam(s) ]
    IELTS [1 Certification Exam(s) ]
    IFPUG [1 Certification Exam(s) ]
    IIA [3 Certification Exam(s) ]
    IIBA [2 Certification Exam(s) ]
    IISFA [1 Certification Exam(s) ]
    Intel [2 Certification Exam(s) ]
    IQN [1 Certification Exam(s) ]
    IRS [1 Certification Exam(s) ]
    ISA [1 Certification Exam(s) ]
    ISACA [4 Certification Exam(s) ]
    ISC2 [6 Certification Exam(s) ]
    ISEB [24 Certification Exam(s) ]
    Isilon [4 Certification Exam(s) ]
    ISM [6 Certification Exam(s) ]
    iSQI [7 Certification Exam(s) ]
    ITEC [1 Certification Exam(s) ]
    Juniper [65 Certification Exam(s) ]
    LEED [1 Certification Exam(s) ]
    Legato [5 Certification Exam(s) ]
    Liferay [1 Certification Exam(s) ]
    Logical-Operations [1 Certification Exam(s) ]
    Lotus [66 Certification Exam(s) ]
    LPI [24 Certification Exam(s) ]
    LSI [3 Certification Exam(s) ]
    Magento [3 Certification Exam(s) ]
    Maintenance [2 Certification Exam(s) ]
    McAfee [8 Certification Exam(s) ]
    McData [3 Certification Exam(s) ]
    Medical [68 Certification Exam(s) ]
    Microsoft [375 Certification Exam(s) ]
    Mile2 [3 Certification Exam(s) ]
    Military [1 Certification Exam(s) ]
    Misc [1 Certification Exam(s) ]
    Motorola [7 Certification Exam(s) ]
    mySQL [4 Certification Exam(s) ]
    NBSTSA [1 Certification Exam(s) ]
    NCEES [2 Certification Exam(s) ]
    NCIDQ [1 Certification Exam(s) ]
    NCLEX [3 Certification Exam(s) ]
    Network-General [12 Certification Exam(s) ]
    NetworkAppliance [39 Certification Exam(s) ]
    NI [1 Certification Exam(s) ]
    NIELIT [1 Certification Exam(s) ]
    Nokia [6 Certification Exam(s) ]
    Nortel [130 Certification Exam(s) ]
    Novell [37 Certification Exam(s) ]
    OMG [10 Certification Exam(s) ]
    Oracle [282 Certification Exam(s) ]
    P&C [2 Certification Exam(s) ]
    Palo-Alto [4 Certification Exam(s) ]
    PARCC [1 Certification Exam(s) ]
    PayPal [1 Certification Exam(s) ]
    Pegasystems [12 Certification Exam(s) ]
    PEOPLECERT [4 Certification Exam(s) ]
    PMI [15 Certification Exam(s) ]
    Polycom [2 Certification Exam(s) ]
    PostgreSQL-CE [1 Certification Exam(s) ]
    Prince2 [6 Certification Exam(s) ]
    PRMIA [1 Certification Exam(s) ]
    PsychCorp [1 Certification Exam(s) ]
    PTCB [2 Certification Exam(s) ]
    QAI [1 Certification Exam(s) ]
    QlikView [1 Certification Exam(s) ]
    Quality-Assurance [7 Certification Exam(s) ]
    RACC [1 Certification Exam(s) ]
    Real Estate [1 Certification Exam(s) ]
    Real-Estate [1 Certification Exam(s) ]
    RedHat [8 Certification Exam(s) ]
    RES [5 Certification Exam(s) ]
    Riverbed [8 Certification Exam(s) ]
    RSA [15 Certification Exam(s) ]
    Sair [8 Certification Exam(s) ]
    Salesforce [5 Certification Exam(s) ]
    SANS [1 Certification Exam(s) ]
    SAP [98 Certification Exam(s) ]
    SASInstitute [15 Certification Exam(s) ]
    SAT [1 Certification Exam(s) ]
    SCO [10 Certification Exam(s) ]
    SCP [6 Certification Exam(s) ]
    SDI [3 Certification Exam(s) ]
    See-Beyond [1 Certification Exam(s) ]
    Siemens [1 Certification Exam(s) ]
    Snia [7 Certification Exam(s) ]
    SOA [15 Certification Exam(s) ]
    Social-Work-Board [4 Certification Exam(s) ]
    SpringSource [1 Certification Exam(s) ]
    SUN [63 Certification Exam(s) ]
    SUSE [1 Certification Exam(s) ]
    Sybase [17 Certification Exam(s) ]
    Symantec [135 Certification Exam(s) ]
    Teacher-Certification [4 Certification Exam(s) ]
    The-Open-Group [8 Certification Exam(s) ]
    TIA [3 Certification Exam(s) ]
    Tibco [18 Certification Exam(s) ]
    Trainers [3 Certification Exam(s) ]
    Trend [1 Certification Exam(s) ]
    TruSecure [1 Certification Exam(s) ]
    USMLE [1 Certification Exam(s) ]
    VCE [6 Certification Exam(s) ]
    Veeam [2 Certification Exam(s) ]
    Veritas [33 Certification Exam(s) ]
    Vmware [58 Certification Exam(s) ]
    Wonderlic [2 Certification Exam(s) ]
    Worldatwork [2 Certification Exam(s) ]
    XML-Master [3 Certification Exam(s) ]
    Zend [6 Certification Exam(s) ]





    References :


    Blogspot : http://killexams-braindumps.blogspot.com/2017/10/ensure-your-success-with-this-310-202.html
    Dropmark : http://killexams.dropmark.com/367904/11507822
    Wordpress : http://wp.me/p7SJ6L-qf
    Scribd : https://www.scribd.com/document/357584527/Pass4sure-310-202-Braindumps-and-Practice-Tests-with-Real-Questions
    weSRCH : https://www.wesrch.com/business/prpdfBU1HWO000USPF
    Issu : https://issuu.com/trutrainers/docs/310-202
    Dropmark-Text : http://killexams.dropmark.com/367904/12064686
    Youtube : https://youtu.be/Emtk-nIB6Mg
    RSS Feed : http://feeds.feedburner.com/WhereCanIGetHelpToPass310-202Exam
    Vimeo : https://vimeo.com/243587913
    Google+ : https://plus.google.com/112153555852933435691/posts/QZFbKBmFms8?hl=en
    publitas.com : https://view.publitas.com/trutrainers-inc/review-310-202-real-question-and-answers-before-you-take-test
    Calameo : http://en.calameo.com/account/book#
    Box.net : https://app.box.com/s/zkzxf7g3kjgg1jx80q4uaaatgjcnb47c
    zoho.com : https://docs.zoho.com/file/5j7aq23edcb85a5504f089a56e75bd9423c95






    Back to Main Page

    SUN 310-202 Exam (Certified System Administrator for the Solaris 10 OS, Part ll) Detailed Information



    References:


    Pass4sure Certification Exam Study Notes- Killexams.com
    Download Hottest Pass4sure Certification Exams - CSCPK
    Complete Pass4Sure Collection of Exams - BDlisting
    Latest Exam Questions and Answers - Ewerton.me
    Pass your exam at first attempt with Pass4Sure Questions and Answers - bolink.org
    Here you will find Real Exam Questions and Answers of every exam - dinhvihaiphong.net
    Hottest Pass4sure Exam at escueladenegociosbhdleon.com
    Download Hottest Pass4sure Exam at ada.esy
    Pass4sure Exam Download from aia.nu
    Pass4sure Exam Download from airesturismo
    Practice questions and Cheat Sheets for Certification Exams at linuselfberg
    Study Guides, Practice questions and Cheat Sheets for Certification Exams at brondby
    Study Guides, Study Tools and Cheat Sheets for Certification Exams at assilksel.com
    Study Guides, Study Tools and Cheat Sheets for Certification Exams at brainsandgames
    Study notes to cover complete exam syllabus - crazycatladies
    Study notes, boot camp and real exam Q&A to cover complete exam syllabus - brothelowner.com
    Study notes to cover complete exam syllabus - carspecwall
    Study Guides, Practice Exams, Questions and Answers - cederfeldt
    Study Guides, Practice Exams, Questions and Answers - chewtoysforpets
    Study Guides, Practice Exams, Questions and Answers - Cogo
    Study Guides, Practice Exams, Questions and Answers - cozashop
    Study Guides, Study Notes, Practice Test, Questions and Answers - cscentral
    Study Notes, Practice Test, Questions and Answers - diamondlabeling
    Syllabus, Study Notes, Practice Test, Questions and Answers - diamondfp
    Updated Syllabus, Study Notes, Practice Test, Questions and Answers - freshfilter.cl
    New Syllabus, Study Notes, Practice Test, Questions and Answers - ganeshdelvescovo.eu
    Syllabus, Study Notes, Practice Test, Questions and Answers - ganowebdesign.com
    Study Guides, Practice Exams, Questions and Answers - Gimlab
    Latest Study Guides, Practice Exams, Real Questions and Answers - GisPakistan
    Latest Study Guides, Practice Exams, Real Questions and Answers - Health.medicbob
    Killexams Certification Training, Q&A, Dumps - kamerainstallation.se
    Killexams Syllabus, Killexams Study Notes, Killexams Practice Test, Questions and Answers - komsilanbeagle.info
    Pass4sure Study Notes, Pass4sure Practice Test, Killexams Questions and Answers - kyrax.com
    Pass4sure Brain Dump, Study Notes, Pass4sure Practice Test, Killexams Questions and Answers - levantoupoeira
    Pass4sure Braindumps, Study Notes, Pass4sure Practice Test, Killexams Questions and Answers - mad-exploits.net
    Pass4sure Braindumps, Study Notes, Pass4sure Practice Test, Killexams Questions and Answers - manderije.nl
    Pass4sure study guides, Braindumps, Study Notes, Pass4sure Practice Test, Killexams Questions and Answers - manderije.nl


    killcerts.com (c) 2017